CTの取扱説明書・マニュアル [全50ページ 1.34MB]
3
14 / 50 ページ
14 / 50 ページ
現在のページURL
2382-4. Using other driving systemsCT200h_U (OM76040U)■Dynamic radar cruise control can be set when●The shift position is in D.●Vehicle speed is above approximately 30 mph (50 km/h).■Accelerating after setting the vehicle speedThe vehicle can accelerate normally. After acceleration, the set speed resumes.However, during vehicle-to-vehicle distance control mode, the vehicle speed maydecrease below the set speed in order to maintain the distance to the vehicleahead.■Set speedThe set speed may be unsustainable depending on driving circumstances.■Automatic cancelation of vehicle-to-vehicle distance controlVehicle-to-vehicle distance control driving is automatically canceled in the follow-ing situations:●Actual vehicle speed falls below approximately 25 mph (40 km/h).●Enhanced VSC is activated.●The sensor cannot operate correctly because it is covered in some way.●The windshield wipers are operating at high speed. (when the wiper switch is setto the "AUTO" mode or the high speed wiper operation position).If vehicle-to-vehicle distance control driving is automatically canceled for any otherreason, there may be a malfunction in the system. Contact your Lexus dealer.
参考になったと評価 
3人が参考になったと評価しています。
このマニュアルの目次
-
1 .2252When drivingCT200h_U ...2252When drivingCT200h_U (OM76040U)2-4. Using other driving systemsCruise control∗∗: If equippedUse the cruise control to maintain a set speed without depressing theaccelerator pedal.IndicatorDisplayCruise control switch■Setting the vehicle speedPress the ...
-
2 .2262-4. Using other drivi...2262-4. Using other driving systemsCT200h_U (OM76040U)Accelerate or decelerate thevehicle to the desired speed,and push the lever down to setthe speed."SET" will be displayed.The vehicle speed at themoment the lever is releasedbecomes the set speed.■Adjust...
-
3 .2272-4. Using other drivi...2272-4. Using other driving systems2When drivingCT200h_U (OM76040U)■Cruise control can be set when●The shift position is in D.●Vehicle speed is above approx imately 25 mph (40 km/h). ■Accelerating after setting the vehicle speed●The vehicle can be accelera...
-
4 .2282-4. Using other drivi...2282-4. Using other driving systemsCT200h_U (OM76040U)CAUTION■To avoid operating the cruise control by mistakeSwitch the cruise control off using the "ON-OFF" button when not in use.■Situations unsuitable for cruise controlDo not use cruise control in any...
-
5 .2292-4. Using other drivi...2292-4. Using other driving systems2When drivingCT200h_U (OM76040U)Dynamic radar cruise control∗∗: If equippedDynamic radar cruise control supple ments conventional cruise controlwith a vehicle-to-vehicle distance control. In vehicle-to-vehicle distancecon...
-
6 .2302-4. Using other drivi...2302-4. Using other driving systemsCT200h_U (OM76040U)■Setting the vehicle speed (vehicle-to-vehicle distance controlmode)Press the "ON-OFF" button toactivate the cruise control.Radar cruise control indicatorwill come on.Press the button again to deacti-va...
-
7 .2312-4. Using other drivi...2312-4. Using other driving systems2When drivingCT200h_U (OM76040U)■Adjusting the set speedTo change the set speed, operate the lever until the desired setspeed is displayed.Increases the speedDecreases the speedFine adjustment: Momentarilymove the lever ...
-
8 .2322-4. Using other drivi...2322-4. Using other driving systemsCT200h_U (OM76040U)■Changing the vehicle-to-vehicle distancePressing the button changes thevehicle-to-vehicle distance asfollows:LongMediumShortThe vehicle-to-vehicle distanceis set automatically to longmode when the "POW...
-
9 .2332-4. Using other drivi...2332-4. Using other driving systems2When drivingCT200h_U (OM76040U)■Canceling and resuming the speed controlPulling the lever toward youcancels the cruise control.The speed setting is also can-celed when the brakes areapplied.Pushing the lever up resumesth...
-
10 .2342-4. Using other drivi...2342-4. Using other driving systemsCT200h_U (OM76040U)Driving in vehicle-to-vehicle distance control modeThis mode employs a radar sensor to detect the presence of vehicles upto approximately 400 ft. (120 m) ah ead, determines the current vehicle-to-vehicl...
-
11 .2352-4. Using other drivi...2352-4. Using other driving systems2When drivingCT200h_U (OM76040U)Example of constant speed cruisingWhen there are no vehicles aheadThe vehicle travels at the speed set by the driver. The desired vehicle-to-vehi-cle distance can also be set by operat ing...
-
12 .2362-4. Using other drivi...2362-4. Using other driving systemsCT200h_U (OM76040U)Approach warningWhen your vehicle is too close to a vehicle ahead, and sufficient auto-matic deceleration via the cruise control is not possible, the display willflash and the buzzer will sound to al e...
-
13 .2372-4. Using other drivi...2372-4. Using other driving systems2When drivingCT200h_U (OM76040U)Selecting conventional constant speed control modeConstant speed control mode differs from vehicle-to-vehicle distancecontrol mode. When constant speed control mode is selected, your vehi-...
-
14 .2382-4. Using other drivi...2382-4. Using other driving systemsCT200h_U (OM76040U)■Dynamic radar cruise control can be set when●The shift position is in D.●Vehicle speed is above approximately 30 mph (50 km/h).■Accelerating after setting the vehicle speedThe vehicle can accelerate no...
-
15 .2392-4. Using other drivi...2392-4. Using other driving systems2When drivingCT200h_U (OM76040U)■Automatic cancelation of constant speed controlThe cruise control will stop maintaining the vehicle speed in the following situations:●Actual vehicle speed is more than approximately 10 mp...
-
16 .2402-4. Using other drivi...2402-4. Using other driving systemsCT200h_U (OM76040U)■Warning messages and buzzers for dynamic radar cruise controlWarning messages and buzzers are used to indicate a system malfunction or toinform the driver of the need for caution while driving. ( →P. ...
-
17 .2412-4. Using other drivi...2412-4. Using other driving systems2When drivingCT200h_U (OM76040U)CAUTION■Before using dynamic radar cruise controlDo not overly rely on vehicle-to-vehicle distance control.Be aware of the set speed. If automatic deceleration/acceleration is not appropri...
-
18 .2422-4. Using other drivi...2422-4. Using other driving systemsCT200h_U (OM76040U)CAUTION■Situations unsuitable for dynamic radar cruise controlDo not use dynamic radar cruise contro l in any of the following situations.Doing so may result in inappropriate sp eed control and could ca...
-
19 .2432-4. Using other drivi...2432-4. Using other driving systems2When drivingCT200h_U (OM76040U)CAUTION■Conditions under which the vehicle-to-vehicle distance control may not functioncorrectlyApply the brakes as necessary in the foll owing conditions as the radar sensor maynot be able...
-
20 .2442-4. Using other drivi...2442-4. Using other driving systemsCT200h_U (OM76040U)Intuitive parking assist∗∗: If equippedThe distance from your vehicle to nearby obstacles when parallel parkingor maneuvering into a garage is measured by the sensors and communi-cated via the multi-inf...
-
21 .2452-4. Using other drivi...2452-4. Using other driving systems2When drivingCT200h_U (OM76040U)DisplayWhen the sensors detect an obstacle, a graphic is shown on the multiinformation display depending on the position and distance to the obsta-cle.■Multi-information displayFront corne...
-
22 .2462-4. Using other drivi...2462-4. Using other driving systemsCT200h_U (OM76040U)The distance display and buzzerWhen a sensor detects an obstacle, the direction of and the approximatedistance to the obstacle are displayed and the buzzer sounds.■Distance display Corner sensorsThe sys...
-
23 .2472-4. Using other drivi...2472-4. Using other driving systems2When drivingCT200h_U (OM76040U)■Buzzer operation and distance to an obstacle A buzzer sounds when the corner se nsors and rear center sensor areoperating. ●The buzzer beeps faster as the ve hicle approaches an obstacle.W...
-
24 .2482-4. Using other drivi...2482-4. Using other driving systemsCT200h_U (OM76040U)■Sensor detection information●Certain vehicle conditions and the su rrounding environment may affect theability of a sensor to correctly detect an obstacle. Particular instances where thismay occur are...
-
25 .2492-4. Using other drivi...2492-4. Using other driving systems2When drivingCT200h_U (OM76040U)■If the display flashes and a message is displayed→P. 609■CustomizationSettings (e.g. buzzer volume) can be changed. (Customizable features →P. 701)■CertificationFor vehicles sold in the U...
-
26 .2502-4. Using other drivi...2502-4. Using other driving systemsCT200h_U (OM76040U)Rear view monitor system∗∗: If equippedThe rear view monitor system assists the driver by displaying an image ofthe view behind the vehicle while re versing. The image is displayed inreverse on the scre...
-
27 .2512-4. Using other drivi...2512-4. Using other driving systems2When drivingCT200h_U (OM76040U)■Switching the screen■When using the rear view monitor systemThe anti-glare function of the inside rear view mirror will be canceled.■Automatic shut offThe display will be turned off automa...
-
28 .2522-4. Using other drivi...2522-4. Using other driving systemsCT200h_U (OM76040U)●To select a display language (English, French or Spanish).Push and hold the "AUTO" button for 6 to 12 seconds.The monitor should turn on and the indicator should turn green.Push the "AUTO" button.Each ...
-
29 .2532-4. Using other drivi...2532-4. Using other driving systems2When drivingCT200h_U (OM76040U)■Displayed areaThe area covered by the camera is limited.Objects which are close to either corner ofthe bumper or under the bumper cannot beseen on the screen.The area displayed on the scre...
-
30 .2542-4. Using other drivi...2542-4. Using other driving systemsCT200h_U (OM76040U)■Rear view monitor guide linesGuide lines are displayed on the screen.Guide lines shown differ from those shown on the actual screen.Vehicle width extension guide lines (blue)These lines indicate the es...
-
31 .2552-4. Using other drivi...2552-4. Using other driving systems2When drivingCT200h_U (OM76040U)■Driving precautionsWhen the grade behind the vehicle slopes upsharply, objects appear to be farther awaythan they actually are.When the grade behind the vehicle slopesdown sharply, objects...
-
32 .2562-4. Using other drivi...2562-4. Using other driving systemsCT200h_U (OM76040U)The distance that appears on the screenbetween three-dimensional objects (such asvehicles) and flat surfaces (such as the road)and the actual distance differ as follows.In reality, C = A < B (C and A ar...
-
33 .2572-4. Using other drivi...2572-4. Using other driving systems2When drivingCT200h_U (OM76040U)■Rear view monitor system camera●The camera uses a special lens. The dis-tance of the image that appears on thescreen differs from the actual distance.●In the following cases, it may be dif...
-
34 .2582-4. Using other drivi...2582-4. Using other driving systemsCT200h_U (OM76040U)■Smear effect■Flicker effectWhen the camera is used under fluorescent lights, sodium lights, mercury lights,etc., the lights and the illuminated areas may appear to flicker.If a bright light (e.g. sunli...
-
35 .2592-4. Using other drivi...2592-4. Using other driving systems2When drivingCT200h_U (OM76040U)CAUTION■When using the rear view monitor systemObserve the following precautions to avoid an accident that could result in death orserious injuries.●Never depend solely on the monitor syst...
-
36 .2602-4. Using other drivi...2602-4. Using other driving systemsCT200h_U (OM76040U)CAUTION■Conditions which may affect the rear view monitor system●If the back of the vehicle has been hit, the camera's position and mounting anglemay have been changed. Have the vehi cle inspected by yo...
-
37 .2612-4. Using other drivi...2612-4. Using other driving systems2When drivingCT200h_U (OM76040U)Driving assist systemsTo help enhance driving safety and performance, the following systemsoperate automatically in response to various driving situations. Be aware,however, that these syst...
-
38 .2622-4. Using other drivi...2622-4. Using other driving systemsCT200h_U (OM76040U)When the VSC/TRAC systems are operatingIf the vehicle is in danger of slip-ping or if any of the drive wheelsspins, the slip indicator light flashesto indicate that the VSC/TRACsystems are operating. ■S...
-
39 .2632-4. Using other drivi...2632-4. Using other driving systems2When drivingCT200h_U (OM76040U)CAUTION■The ABS does not operate effectively when●Tires with inadequate gripping ability ar e used (such as excessively worn tires ona snow covered road).●The vehicle hydroplanes while driv...
-
40 .2642-4. Using other drivi...2642-4. Using other driving systemsCT200h_U (OM76040U)CAUTION■Replacing tiresMake sure that all tires are of the specifie d size and of the same brand, tread patternand total load capacity. In addition, make su re that the tires are inflated to the rec-omm...
-
41 .2652-4. Using other drivi...2652-4. Using other driving systems2When drivingCT200h_U (OM76040U)Hill-start assist control■Hill-start assist control can be operated when●The shift position is in a position other than P.●The parking brake is not applied.●The accelerator pedal is not dep...
-
42 .2662-4. Using other drivi...2662-4. Using other driving systemsCT200h_U (OM76040U)■Hill-start assist control buzzer●When hill-start assist control is act ivated, the buzzer will sound once.●In the following situations, hill-start assist control will be canceled and thebuzzer will sou...
-
43 .2672-4. Using other drivi...2672-4. Using other driving systems2When drivingCT200h_U (OM76040U)PCS (Pre-Collision System)∗∗: If equippedWhen the radar sensor detects possibilit y of a frontal collision, the pre-col-lision system such as the brakes and seat belts are automatically en...
-
44 .2682-4. Using other drivi...2682-4. Using other driving systemsCT200h_U (OM76040U)Disabling pre-collision brakingPre-collision braking disabledPre-collision braking enabledThe "PCS" warning light willturn on when pre-collision brak-ing is disabled.Radar sensorThe radar sensor detects...
-
45 .2692-4. Using other drivi...2692-4. Using other driving systems2When drivingCT200h_U (OM76040U)■The pre-collision system is operational when●Pre-collision seat belts (type A)* Vehicle speed is greater than about 19 mph (30 km/h).* The system detects sudden braking or skidding.* The f...
-
46 .2702-4. Using other drivi...2702-4. Using other driving systemsCT200h_U (OM76040U)■Conditions that may trigger the system even if there is no possibility of a collision●When there is an object by the roadside at the entrance to a curve●When passing an oncoming vehicle on a curve●When...
-
47 .2712-4. Using other drivi...2712-4. Using other driving systems2When drivingCT200h_U (OM76040U)■Situations in which the pre-collision system does not function properlyThe system may not function effectively in situations such as the following:●On roads with sharp bends or uneven surf...
-
48 .2722-4. Using other drivi...2722-4. Using other driving systemsCT200h_U (OM76040U)■CertificationFor vehicles sold in the U.S.A.FCC ID: HYQDNMWR005This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause har...
-
49 .2732-4. Using other drivi...2732-4. Using other driving systems2When drivingCT200h_U (OM76040U)CAUTION■Limitations of the pre-collision systemDo not overly rely on the pre-collision system. Always drive safely, taking care toobserve your surroundings and checking for any obstacles o...
-
50 .2742-4. Using other drivi...2742-4. Using other driving systemsCT200h_U (OM76040U)CAUTION■When the sensor may not be correctly detecting the vehicle aheadApply the brakes as necessary in any of the following situations.●When water or snow thrown up by the surrounding vehicles hinders...
