1. 取扱説明書・マニュアル >
2. レクサス >
3. 自動車 >
4. GS の使い方、故障・トラブル対処法 >
5. GS の取扱説明書・マニュアル

GSの取扱説明書・マニュアル [全51ページ 1.52MB]

5When trouble arises5315-2. Steps to take in an emergencyGS_G_UMarch 29, 2010 3:11 pmnStarting the engine when the 12 volt battery is dischargedThe engine cannot be started by push-starting.nTo prevent 12 volt battery dischargelTurn off the headlights and the audio system while the engine is turned off.lTurn off any unnecessary electrical components when the vehicle is running at a low speed for an extended period, such as in heavy traffic, etc.nWhen the 12 volt battery is removed or dischargedThe following systems must be initialized. lTire pressure warning system ( → P. 422)lIntuitive parking assist ( → P. 507)CAUTIONnAvoiding battery fires or explosionsObserve the following precautions to prevent accidentally igniting the flammable gas that may be emitted from the battery.lMake sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any pa rt other than the intended terminal.lDo not allow the jumper cables to come into contact with the "+" and "-" termi-nals.lDo not allow open flame or use matches, cigarette lighters or smoke near the battery.Maintain the engine speed on the second vehicle and turn the "ENGINE START STOP" switch to the IGNITION ON mode, then start the vehicle's engine.Once the vehicle's engine has started, remove the jumper cables in the exact reverse order in which they were con-nected.Once the engine starts, have the ve hicle checked at your Lexus dealer as soon as possible.STEP 5STEP 6

もっと見る

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.