942-1. Driving proceduresChanging shift ranges in S modeShift the shift lever to the S position and operate the shift lever or shiftpaddle switch. UpshiftingDownshiftingThe initial shift range in S mode is automatically set to 5 or 4 according tovehicle speed. However, the initial shift range may be set to 3 or 2 if theAI-SHIFT has operated while the shift lever was in the D position. ( → P. 95)n Shift ranges and their functionsA lower shift range will provide greater engine braking forces than a higher shiftrange.Shift range Function6Automatically selecting gears between 1 and 6 according to vehicle speed and driving conditions.5Automatically selecting gears between 1 and 5 according to vehicle speed and driving conditions.4Automatically selecting gears between 1 and 4 according to vehicle speed and driving conditions.3Automatically selecting gears between 1 and 3 according to vehicle speed and driving conditions.2Automatically selecting gears between 1 and 2 according to vehicle speed and driving conditions.1 Setting the gear at 1.
