MINIの取扱説明書・マニュアル [全186ページ 3.25MB]
ownersmanual2011hardtopconvertible.pdf
gizport - 2013-09-05
http://libraryofmotoring.info/.../ownersmanual2011hardtopconvertible.pdf - 3.25MB
- キャッシュ
6538view
186page / 3.25MB
65AT A GLANCE REFERENCE MOBILITY CONTROLS DRIVING TIPS COMMUNICATIONSActivating the systemPress the SPORT button.The LED lights up.SPORT is briefly displayed in the tachometer.Deactivating the system>Press the SPORT button again.>Switch off the engine.Flat Tire Monitor FTM*The conceptThe system does not measure the actual infla-tion pressure in the tires.The system detects a pressure loss in a tire by comparing the rotational speeds of the individ-ual wheels while moving.In the event of a pressure loss, the diameter and therefore the rotational speed of the corre-sponding wheel change. This is detected and reported as a flat tire.Functional requirementThe system must have been initialized while the tire inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured.Initialize the system after every correction of the tire inflation pressure and after every tire or wheel change.System limitationsSudden serious tire damage caused by external influences cannot be indicated in advance.<A natural, even pressure loss in all four tires can-not be detected. Therefore, check the tire infla-tion pressure regularly.In the following situations, the system could be delayed or malfunction:>System has not been initialized>Driving on snowy or slippery road surface>Performance-oriented style of driving: slip in the drive wheels, high lateral acceleration>Snow chains are attachedWhen the vehicle is driven with a space-saver spare tire*, page145, the Flat Tire Monitor can-not function.Initializing the systemThe initialization process adopts the set inflation tire pressures as reference values for the detec-tion of a flat tire. Initialization is started by con-firming the inflation pressures.Do not initialize the system when driving with snow chains.Using the button in the turn signal lever1.Start the engine, but do not start driving.2.Briefly press the button in the turn signal lever repeatedly until "SET/INFO" is dis-played.3.Press and hold the button until the display changes.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
32332 view
11627 view
42055 view
3435 view
28173 view
もっと見る