MINIの取扱説明書・マニュアル [全283ページ 9.38MB]
ownersmanual2012couperoadsterconvertible.pdf
gizport - 2013-09-05
http://libraryofmotoring.info/.../ownersmanual2012couperoadsterconvertible.pdf - 9.38MB
- キャッシュ
8061view
283page / 9.38MB
Replacing components MOBILITY 233Light-emitting diodes LEDsLight-emitting diodes installed behind translu-cent lenses serve as the light sources for many of the controls and displays in your vehicle. These light-emitting diodes are related to conven-tional laser diodes, and legislation de fines them as Class 1 light-emitting diodes.Do not remove the covers or expose the eyes directly to the unfiltered light source for several hours; otherw ise, this could cause irritation of the retina. <Headlamp glass lensIn cool or humid weather, condensation may occur on the interiors of the headlamps. The condensation disappears a short time after the light is switched on. The headlamps do not need to be changed.Do not remove the condensation from head-lamps, despite driving with lights on, and if condensation increases, e.g., because of water droplets, have this checked by your MINI dealer.Xenon lampsThe service life of these bulbs is very long and the probability of failure very low, provided that they are not switched on and off an excessive number of times. If a xenon lamp fails neverthe-less, switch on the fog lamps and continue the journey with great care, provided that local leg-islation does not prohibit this.Work on the xenon lighting system, including lamp replacem ent, is only to be carried out only by your MINI dealer. Due to high voltage, there is a risk of fatal injury if work on the xenon lamps is carried out improperly. <Halogen low beams and high beamsH13 bulb, 60/5 wattsThe H13 bulb is pressurized. Therefore, wear safety glasses an d protective gloves. Otherwise, there is a risk of injury if the bulb is damaged.<Be careful when inst alling the cover; otherwise, leaks could occur and cause damage to the headlamp system. <Accessing the lamp from the engine compartmentThe low-beam/high-beam bulb can be changed from the engine compartment.Removing the cover:1.Press the tab.2.Flip open the cover and take it out of the holder.Follow the same steps in reverse order to reattach the cover.Be careful when inst alling the cover; otherwise, leaks could occur and cause damage to the headlamp system. <Replacing the bulb1.Turn the lamp counterclockwise, arrow 1, and remove it, arrow 2.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
32620 view
11748 view
42504 view
3450 view
28384 view
もっと見る