V60の取扱説明書・マニュアル [全422ページ 8.97MB]
V60_owners_manual_MY13_en-GB_TP_15239.pdf
http://esd.volvocars.com/.../V60_owners_manual_MY13_en-GB_TP_15239.pdf - 8.97MB
- キャッシュ
52149view
422page / 8.97MB
09 Maintenance and serviceLamps 093363. (Second illustration) Detach the headlamp connector bypressing down the clip with your thumb. At the same time, guide out the con-nector with your other hand.4. Lift out the headlamp and place it on a softsurface to avoid scratching the lens.5. Replace the bulb in question.Securing the headlamp1. Plug in the connector, a clicking soundshould be heard.2. Reinstall the headlamp and locking pins.The short pin is fitted closest to the grille.Check that they are correctly inserted.3. Check the lighting.The headlamp must be mounted and the con-nector correctly installed before the lighting isswitched on or the remote control key isinserted into the ignition switch.Removing the coverBefore starting to replace a bulb, seepage 335.1. Unscrew the cover's four screws with thetool (1) in the tool kit, see page 310. Theyshould not be detached completely.(3 - 4 turns are sufficient.)IMPORTANTUse the tool in the toolkit to remove andattach this correctly.2. Slide the cover to one side.3. Remove the cover.Reinstall the cover in reverse order.Dipped beam, halogen1. Detach the headlamp, see page 335.2. Remove the cover.3. Unplug the connector from the bulb.4. Detach the bulb by pulling it straight out.5. The guide pin on the lamp should bestraight up when it is fitted and a clickingsound should be heard when it clicks intoplace.Reinstall the parts in reverse order.
参考になったと評価
22人が参考になったと評価しています。
その他の取扱説明書
2891 view
823 view
980 view
2601 view