X3の取扱説明書・マニュアル [全126ページ 4.65MB]
123806.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123806.pdf - 4.65MB
- キャッシュ
21357view
126page / 4.65MB
ReferenceAt a glanceControlsDriving tipsMobility 37Possible displays P R N D SD M1 M2 M3 M4 M5The selector lever position is indicated, and in the manual mode the gear currently engaged.Range selection An interlock prevents inadvertent gearshifts into selector-lever positions R and P. To cancel the interlock, press the button on the front of the selector-lever knob, refer to arrow.Shiftlock With the vehicle stationary, press the brake pedal before shifting out of P or N; the shift command will not be executed unless the brake is applied.To prevent the vehicle from 'creeping' after you select a gear, maintain pressure on the brake pedal until you are ready to start.To prevent the vehicle from rolling, always select position P and engage the handbrake before leaving the vehicle with the engine running.<P Park Select only when the vehicle is stationary. The transmission locks to prevent the rear wheels from turning. R Reverse Select only when the vehicle is stationary. N NeutralFor example, engage in automatic car washes. The vehicle can roll.D Drive, automatic shift programThis position is designed for driving under all normal operating conditions. All forward gears are available. Kick-down The kick-down mode provides maximum accel-eration. Press the accelerator pedal past the increased resistance point at the full-throttle position. M/S Manual mode and SportProgram Move the selector lever from position D to the left into shifting slot M/S: The sport program is activated and SD appears in the instrument cluster. This position is recommended for a performance-oriented driving style. When the selector lever is moved briefly towards + or -, manual operation is activated and the Steptronic shifts gears. The instrument cluster shows M1 through M5.Upshifts and downshifts are executed only when they will result in a plausible combination of engine and vehicle speed; as a result, for example, a downshift that would cause the engine to overrev will not be executed by the system. The gear selected will appear briefly in the instrument cluster followed by the current gear.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
55227 view
26824 view
21503 view
23517 view
22754 view
もっと見る