1. 取扱説明書・マニュアル >
2. BMW >
3. 自動車 >
4. X3 の使い方、故障・トラブル対処法 >
5. X3 の取扱説明書・マニュアル

X3の取扱説明書・マニュアル [全146ページ 4.87MB]

ReferenceAt a glanceControlsDriving tipsMobility 51MalfunctionThe LED in the button flashes and a short con-tinuous tone sounds. PDC is malfunctioning. Switch off PDC. Have the system checked.To prevent this problem, keep the sensors clean and free of ice or snow in order to ensure that they will continue to operate effectively. When using high-pressure washers, do not spray sensors for long periods and keep the sprayer at least 4 in/10 cm away from the sen-sors.System limitsEven with PDC, final responsibility for estimating the distance between the vehicle and any obstructions always remains with the driver. Even when sensors are involved, there is a blind spot in which objects cannot be detected. The system is also subject to the physical limits that apply to all forms of ultra-sonic measurement, such as those encoun-tered with tow bars and tr ailer couplings, or thin and wedge-shaped objects. Low objects already displayed, e.g. curb edges, can come into the blind spot of th e sensors before or after a continuous tone sounds. The system may fail to detect higher obstacles such as projections from walls.Loud sources of sound, inside and outside the vehicle, could drown out the PDC signal tone. <Driving stability control systemsYour BMW is equipped with an extended array of systems designed to enhance and maintain vehicle stability even under unfavorable driving conditions.ABS Antilock Brake SystemABS prevents the wheels from locking during braking. Safe steering re sponse is maintained even during full braking. This results in an increase in the active safety.ABS is operational every time you start the engine. Safe braking, refer to page 84.Electronic brake-force distributionThe system controls the brake pressure in the rear wheels to ensure a stable braking behavior.Brake assistantWhen the brake pedal is depressed quickly, this system automatically generates a maximum braking force distribution and thus helps keep the braking distance to a minimum during full braking. This system exploits all of the benefits provided by ABS.As long as you want full braking to continue, do not reduce pressure on the brake.DSC Dynamic Stability ControlDSC prevents slip at the drive wheels when starting off and accelerating. The system also detects unstable driving conditions, such as a fishtailing of the vehicle's rear end or the sliding of the vehicle on its front wheels. In these cir-cumstances, DSC helps keep the vehicle on a safe path, within physic al limits, by reducing engine output and by applying the brakes in individual wheels.The laws of physics cannot be repealed, even with DSC. An appropriate driving style always remains the responsibility of the driver. Do not squander the additional margin of safety by driving dangerously; otherwise, you run the risk of causing an accident. <Deactivating DSCMaintain pressure on the button until the DSC indicator lamp lights up, but do not press for longer than approx. 10 seconds. DTC Dynamic Traction Control and DSC are deactivated

もっと見る

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.