1. 取扱説明書・マニュアル >
2. BMW >
3. 自動車 >
4. Z4 の使い方、故障・トラブル対処法 >
5. Z4 の取扱説明書・マニュアル

Z4の取扱説明書・マニュアル [全128ページ 4.41MB]

ReferenceAt a glanceControlsDriving tipsMobility 25Switching off tilt alarm sensor and interior motion sensor>Press the button on the remote control twice in a row.The indicator lamp lights up briefly and then flashes continuously. The tilt alarm sensor and the interior motion sensor are deactivated until the vehicle is again unlocked and locked.WindowsTo prevent injuries, exercise care when closing the windows and keep them in your field of vision until they are shut.Take the key with you when you leave the car, otherwise children could operate the windows and possibly injure themselves. <Opening, closingIgnition key in position 1 or higher:>Press the switch downward to the resis-tance point.The window continues to open as long as you press the switch.>Press the switch beyond the resistance point.The window opens automatically. Press the switch again to stop the opening move-ment.You can close the window in the same manner by pulling the switch upward.If you wish, you can have this special fea-ture activated/deactivated. <After switching off the ignitionYou can still open or close the windows for approx. 1 minute, as long as no one opens any of the doors.For convenience operation via the remote con-trol or the door lock, refer to page 19 or20, respectively.Pinch protection systemIf the closing force exceeds a certain value while a window is being raised, the system responds by stopping the window and then retracting it a short distance.Despite the pinch protection system check and clear the window's travel path prior to closing it, otherwise the safety system might fail to detect certain kinds of obstruc-tions, such as thin objects, and the window would continue closing. Do not install any accessories within the win-dows' range of movement; otherwise the pinch protection system could be impaired. <The closing force can change as a result of extreme temperature fluctuations. The window then opens slightly after closing even if there is no obstacle within the window's travel path. If this occurs, override the pinch protec-tion system.<Pulling the switch beyond the resistance point and holding it there overrides and deactivates the pinch protection system.After a power supply interruptionAfter a power supply interruption, for instance after disconnecting the battery, the pinch pro-tection system must be reinitialized.Roadster: when the convertible top has been stored in the convertible top com-partment for an extended period of time, e.g. in the winter months because the hardtop was being used, it may also be necessary to reinitial-ize the pinch protection system. <Ensure that the doors and the Roadster's con-vertible top are closed before initializing.

もっと見る

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.