Z4の取扱説明書・マニュアル [全132ページ 3.23MB]
123844.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123844.pdf - 3.23MB
- キャッシュ
21004view
132page / 3.23MB
Replacing components10055-watt bulb, H7The H7 bulb is pressurized. Therefore, wear safety glasses and protective gloves. Otherwise there is a risk of injury if the bulb is damaged.<1.Turn the bulb socket counterclockwise and take it out.2.Remove and replace the bulb.3.Insert bulb socket.Side marker lamps, front5-watt bulb, W5W1.Take out bulb socket.2.Remove and replace the bulb.3.Insert bulb socket.Front turn signal indicators21-watt bulb, H211.Insert a Phillips-head screwdriver from the onboard tool kit into the appropriate open-ing, arrows1.2.Turn the Phillips-head screwdriver to the left, arrows2.3.Use the Phillips-head screwdriver to take the bulb socket out.4.Remove and replace the bulb.5.Insert bulb socket.Side turn signal indicators5-watt bulb, WY5W1.Turn the lamp to the left and remove.2.Apply gentle pressure to the bulb socket while turning it to the left and remove it.3.Remove and replace the bulb.4.Insert bulb socket.5.Insert the lamp.
参考になったと評価
6人が参考になったと評価しています。
その他の取扱説明書
38351 view
31138 view
13905 view
21365 view
21069 view
もっと見る