Z4の取扱説明書・マニュアル [全132ページ 3.23MB]
123844.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123844.pdf - 3.23MB
- キャッシュ
21004view
132page / 3.23MB
ReferenceAt a glanceControlsDriving tipsMobility 43R ReverseSelect only when the vehicle is stationary.N Neutral, idleYou can select this in a car wash, for example. The vehicle can roll.D Drive, automatic positionThis position is designed for driving under all normal operating conditions. All forward gears are selected automatically.Under normal operating conditions, fuel con-sumption is lowest when you are driving in posi-tion D.Kickdown Kick-down enables you to achieve maximum performance.Press the accelerator pedal beyond the full-throttle resistance point.Manual operation and Sport program M/SMove the selector lever from position D to the left into the M/S range:The Sport program is activated. This is indi-cated by the display SD in the instrument clus-ter. This position is recommended for a perfor-mance-oriented driving style.The Sport program is enabled automatically when the Dynamic Driving Control system is activated, refer to page 44.To use the automatic func tion again, move the selector lever to the right into position D.Shifting gears using the selector leverWhen you press the selector lever forwards or backwards, the manual mode is activated and Steptronic changes gear. The instrument clus-ter shows M1 through M6.The transmission will only execute upshifts and downshifts that will result in an appropriate combination of vehicle speed and engine rpm. For instance, downshifts that would result in excessive engine speed will not be executed. The desired gear will appear briefly in the instrument cluster, followed by the actual gear.Shifting gears via the shift paddles* on the steering wheelThe shift paddles allow you to shift gears quickly since your hands can remain on the steering wheel.>When you use the shift paddles on the steering wheel to shift gears while in auto-matic mode, the transmission automatically switches to manual mode.>If you do not use the shift paddles for a cer-tain amount of time and do not accelerate, the transmission automatically switches back to automatic mode.If the selector lever is in the M/S gear plane, manual mode remains active.>To shift up, pull one of the shift paddles.>To shift down, press one of the shift pad-dles.The instrument cluster shows M1 through M6.The transmission will only execute upshifts and downshifts that will result in an appropriate combination of vehicle speed and engine rpm. For instance, downshifts that would result in excessive engine speed will not be executed. The desired gear will appear briefly in the instrument cluster, followed by the actual gear.MalfunctionRed warning lampThe transmission is overheating. Reduce your speed immediately and pull over at a suitable location so that
参考になったと評価
6人が参考になったと評価しています。
その他の取扱説明書
38351 view
31138 view
13905 view
21365 view
21069 view
もっと見る