Z4の取扱説明書・マニュアル [全248ページ 7.63MB]
123860.pdf
gizport - 2013-09-07
http://153.127.246.254/.../123860.pdf - 7.63MB
- キャッシュ
31662view
248page / 7.63MB
Driving62Maintaining current speedTap the lever, arrow 1, or pull it briefly, arrow 2.The car's current speed is stored and main-tained. It is displayed on the speedometer and briefly in the instrument cluster.On uphill gradients, it may prove impossible to maintain the set speed if current engine power output is insufficient. If the engine braking effect is insufficient on downhill slopes, the sys-tem will brake the vehicle slightly.Increasing desired speedRepeatedly press the lever to the resistance point or beyond, arrow 1, until the desired speed is reached.>Each time the lever is pressed to the resis-tance point, the desired speed is increased by approx. 1 mph or 1 km/h.>Each time the lever is pressed beyond the resistance point, the desired speed is increased by up to 5 mph or 10 km/h.The system stores and maintains the speed.Accelerating using the leverAccelerating slightly:Press the lever to the resistance point, arrow 1, and hold until the desired speed is reached.Accelerating significantly:Press the lever beyond the resistance point, arrow 1, and hold until the desired speed is reached.The vehicle accelerates without pressure on the accelerator pedal. The system stores and maintains the speed.Decreasing speedRepeatedly pull the lever to the resistance point or beyond, arrow 2, until the desired speed is displayed.>Each time the lever is pulled to the resis-tance point, the desired speed is decreased by approx. 1 mph or 1 km/h.>Each time the lever is pulled beyond the resistance point, the desired speed is reduced by up to 5 mph or 10 km/h until the minimum speed of 20 mph or 30 km/h is achieved.The system stores and maintains the speed.Interrupting the systemTap the lever upwards or downwards, arrow 3. The displays in the speedometer change color.In addition, the system is automatically deacti-vated:>When you brake the vehicle>When you switch gears very slowly or shift to neutral in cars with a manual trans-mission>When you engage selector lever position N in cars with an automatic transmission>When you engage transmission position N in 7-gear sport automatic transmissions with a dual clutch>When you activate the DTC Dynamic Trac-tion Control or deactivate DSC.>When DSC or ABS is interveningCruise control is not de activated by depressing the accelerator pedal. Once the accelerator pedal is released, the st ored speed is achieved again and maintained.Warning lampThe warning lamp comes on, for example, when cruise control has been deactivated as a result of DSC intervention. A message appears on the Control Display.Deactivating the system>Press the lever upward or downward twice, arrow3.>Switch off the ignition.The stored speed is cleared.Resuming a speed stored beforehandPress the button, arrow 4. The last stored speed is resumed and maintained.
参考になったと評価
8人が参考になったと評価しています。
その他の取扱説明書
38351 view
31138 view
13905 view
21365 view
21069 view
もっと見る