ジュリエッタの取扱説明書・マニュアル [全292ページ 13.06MB]
94995.pdf
http://153.127.244.43/.../94995.pdf - 13.06MB
- キャッシュ
71263view
292page / 13.06MB
INFLATION PROCEDUREWear the protective gloves provided with the kit.Proceed as follows:❒ engage the handbrake, unscrew the tyre valve cap, take out theflexible filler pipe A fig. 134 and tighten the ring nut B on the tyrevalve;❒ make sure that switch A fig. 135 for the compressor is in position 0(off), start the engine, insert the plug into the luggage compartmentpower socket (see fig. 136) or cigar lighter on central tunnel (see fig.137) and switch on the compressor by bringing switch Afig. 135 toposition I (on);❒ inflate the tyre to the pressure indicated in the “Wheels” paragraphprecise reading, check the pressure value on pressure gauge Bfig. 135 with the compressor off;❒ if after five minutes it is still impossible to reach at least 1.8 bar,disengage the compressor from the valve and power socket, thenmove the car forwards by approx. ten metres in order to distributethe sealing fluid inside the tyre evenly, then repeat the inflationoperation;fig. 134A0K0127fig. 135A0K0021fig. 136A0K0152151GETTING TO KNOWYOUR CARSAFETYSTARTING ANDDRIVINGIN ANEMERGENCYSERVICING ANDMAINTENANCETECHNICALSPECIFICATIONSINDEX
参考になったと評価
65人が参考になったと評価しています。