Bronze BR2の取扱説明書・マニュアル [全17ページ 0.55MB]
4
Connecting Your Bronze Reference Loudspeakers You will notice that when you unpack your loudspeaker, there are plastic terminal caps in the terminals where the speaker cable connectors should go. These can be simply removed by placing a thin, flat object underneath them and carefully levering them free. The BR2, BR5 & BR6 can be either single or bi-wired. At Monitor Audio, we would always recommend bi-wiring your loudspeakers for improved sound quality. If you are going to be connecting your speakers in a bi-wire format, please remove the terminal links. This is done by unscrewing the red and black terminals slightly and removing the link. Connect them as in the below, left. You can also bi-amp your loudspeakers. The top terminals are for the HF, and the bottom terminals are for the LF. In the cases where there is a mid bass unit (BR5 and BR6), this is connected to the top terminals The BR1, BR-LCR & BR-FX are single wire only. This can be seen in the illustration below, centre. However if neither of these options are open to you, please connect your loudspeakers as in the illustration below, right. Please remember to leave the terminal links in. Single-Wire Format BR1, LCR Wiring Bi- Wire Format 13 Rev4. (C) Monitor Audio 2006
