Bronze BR2の取扱説明書・マニュアル [全17ページ 0.55MB]
4
Outrigger Foot Fixing (BR5 and BR6 Only) The Bronze Reference Series outrigger foot incorporates a spike for use on carpeted floors and also, a soft polymer pad (for use on wooden or tiled floors). Spike Soft Polymer Pad Outrigger Foot BEWARE. The spikes are very sharp, an d could cause injury if care is not taken when handling them. Please ensure there are no hidden wires under the carpet, or trailing mains leads that could be damaged by the spikes. 1. You can carefully place the cabinet on it’s top or back to fit the outriggers. Locate the outrigger foot over the threaded inserts in the cabinet. 2. Screw these in place using the supplied screws. 3. Place the soft polymer pad into it’s locating positions. These pads are for use on hard floors. If you have hard floors, you can now enjoy your speakers. If you have carpet please continue to follow these instructions. 4. Fit the spikes into the inserts on the outrigger feet. If you have a very thick pile carpet, you may need to remove the soft polymer pad to ensure the spikes fully penetrate the carpet. 5. Carefully turn your speaker back ov er and check that it is evenly balanced. If uneven, you can adjust the height in the appropriate corner by unscrewing the spike slight ly. This operation may need to be repeated a several times to ensure your cabinet is completely level. When you are happy with the balance of the cabinet, tighten the locking nut on each spike. The soft polymer pad may need to be removed to do this. 8 Rev4. (C) Monitor Audio 2006
