G2411HDの取扱説明書・マニュアル [全30ページ 1.13MB]
lcd%20monitor_um_user%20manual_20090213_144607g241...
ftp://220.228.13.50/.../lcd%20monitor_um_user%20manual_20090213_144607g241... - 1.13MB
- キャッシュ
9920view
30page / 1.13MB
8 How to assemble your monitor hardware 2. Connect the PC video cable.Do not use both DVI-D cable and D-Sub cable on the same PC. The only case in which both cables can be used is if they are connec ted to two different PCs with appropriate video systems. Connect one end of the DVI-D cable to the monitor DVI-D socket and the other end to the DVI-D port on your computer. (optional)The DVI-D format is used for direct digital connection between source video and digital LCD monitors or projectors. The digital video signals produce a superior quality picture than analog video signals.Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor D-Sub socket. Connect the other plug of the D-Sub cable (at the end with the ferrite filter) to the computer video D-Sub socket. Connect the plug of the HDMI cable to the monitor video socket. Connect the other end of the cable to the computer video socket. (optional)Tighten all finger screws to prevent the plugs from acci-dently falling out during use.EitherOrOr3. Connect the power cable to the monitor.Plug one end of the power cord into the socket labelled 'POWER IN' on the rear of the monitor. Do not connect the other end to a power outlet just yet.
参考になったと評価
7人が参考になったと評価しています。