Inspiron 1300の取扱説明書・マニュアル [全44ページ 1.52MB]
inspiron-1300x_service%20manual_en-us.pdf
gizport - 2013-08-16
ftp://ftp.dell.com/.../inspiron-1300x_service%20manual_en-us.pdf - 1.52MB
- キャッシュ
14507view
44page / 1.52MB
Back to Contents Page Microprocessor ModuleDell™ Inspiron™ 1300/B120/B130 Service Manual Removing the Microprocessor Module Installing the Microprocessor Module Removing the Microprocessor Module CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide. CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any ofyour computer's electronic components. You can do so by touching an unpainted metal surface.NOTICE: Press and hold the microprocessor down by applying slight pressure to the center of the microprocessor while turning the cam screw toprevent intermittent contact between the cam screw and microprocessor.NOTICE: To avoid damage to the microprocessor, hold the screwdriver so that it is perpendicular to the microprocessor when turning the cam screw.1. Follow the instructions in Before Working Inside Your Computer.2. Turn over the computer.3. Remove the microprocessor thermal-cooling assembly. See Removing the Microprocessor Thermal-Cooling Assembly.NOTICE: When removing the microprocessor module, pull the module straight up. Be careful not to bend the pins on the microprocessor module.4. To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.The ZIF-socket cam screw secures the microprocessor to the system board. Take note of the arrow on the ZIF-socket cam screw.1ZIF-socket cam screw5.2ZIF-socket3pin-1 corner of microprocessor Use a microprocessor extraction tool to remove the microprocessor module. Installing the Microprocessor ModuleNOTICE: Ensure that the cam lock is in the fully open position before seating the microprocessor module. Seating the microprocessor module properly inthe ZIF socket does not require force.NOTICE: A microprocessor module that is not properly seated can result in an intermittent connection or permanent damage to the microprocessor andZIF socket.
参考になったと評価
7人が参考になったと評価しています。
その他の取扱説明書
1601 view