XPS M1330の取扱説明書・マニュアル [全43ページ 1.29MB]
xps-m1330_service%20manual_en-us.pdf
gizport - 2013-09-02
ftp://ftp.dell.com/.../xps-m1330_service%20manual_en-us.pdf - 1.29MB
- キャッシュ
16551view
43page / 1.29MB
Back to Contents Page Before You BeginDell™ XPS™ M1330 Service Manual Recommended Tools Turning Off Your Computer Before Working Inside Your ComputerThis section provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that thefollowing conditions exist:l You have performed the steps in Turning Off Your Computer and Before Working Inside Your Computer.l You have read the safety information in the Dell™ Product Information Guide.l A component can be replaced or—if purchased separately—installed by performing the removal procedure in reverse order. Recommended ToolsThe procedures in this document may require the following tools:l Small flat-blade screwdriverl Phillips screwdriverl Hex nut driverl Flash BIOS update program CD Turning Off Your ComputerNOTICE: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.1. Save and close all open files and exit all open programs. 2.Click the Windows Vista Start button, in the lower-left corner of the desktop, click the arrow in the lower-right corner of the Start menu as shownbelow, and then click Shut Down.The computer turns off after the operating system shutdown process is complete.3. Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not automatically turn off when you shutdown your operating system, press and hold the power button until they turn off. Before Working Inside Your ComputerUse the following safety guidelines to help protect your computer from potential damage and to help to ensure your own personal safety. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.NOTICE: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metalmounting bracket. Hold a component such as a processor by its edges, not by its pins.NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is notcovered by your warranty.NOTICE: When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some cables have connectors with locking tabs; ifyou are disconnecting this type of cable, press in on the locking tabs before you disconnect the cable. As you pull connectors apart, keep them evenlyaligned to avoid bending any connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.NOTICE: To avoid damaging the computer, perform the following steps before you begin working inside the computer.1. Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.2. Turn off your computer (see Turning Off Your Computer).3. If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.
参考になったと評価
9人が参考になったと評価しています。
その他の取扱説明書
626 view
408 view
567 view
414 view