R60eの取扱説明書・マニュアル [全268ページ 6.46MB]
	 
	
	
	
	
		
			
				
				
					42x3749_02.pdf
					
					
					Gizbot 2013-09-01
					http://download.lenovo.com/.../42x3749_02.pdf - 6.46MB 
 - キャッシュ 
					
						11811view
					
					268page / 6.46MB
					
					
				 
				
			 
		 
	 
 
	 
 
	
	
	
		
		
	
	
	
	Attention:   The  setup  configuration  on  the  computer  you  are  servicing  may  have  been  customized.  Running  Automatic  Configuration  may  alter  the  settings.  Note  the  current  configuration  settings  (using  the  View  Configuration  option);  then,  when  service  has  been  completed,  verify  that  those  settings  remain  in  effect.  Strategy  for  replacing  a  hard  disk  drive  Always  try  to  run  a  low-level  format  before  replacing  a  hard  disk  drive.  This  will  cause  all  customer  data  on  the  hard  disk  to  be  lost.  Be  sure  that  the  customer  has  a  current  backup  of  the  data  before  doing  this  task.   Attention:   The  drive  startup  sequence  in  the  computer  you  are  servicing  may  have  been  changed.  Be  extremely  careful  during  write  operations  such  as  copying,  saving,  or  formatting.  If  you  select  an  incorrect  drive,  data  or  programs  can  be  overwritten.  Important  notice  for  replacing  a  system  board  Some  components  mounted  on  a  system  board  are  very  sensitive.  Improper  handling  of  a  system  board  can  cause  damage  to  those  components,  and  may  cause  a  system  malfunction.   Attention:   When  handling  a  system  board:  v  Do  not  drop  a  system  board  or  apply  any  excessive  force  to  it.  v  Avoid  rough  handling  of  any  kind.  v  Avoid  bending  a  system  board  and  hard  pushing  to  prevent  cracking  at  each  BGA  (Ball  Grid  Array)  chipset.How  to  use  error  messages  Use  the  error  codes  displayed  on  the  screen  to  diagnose  failures.  If  more  than  one  error  code  is  displayed,  begin  the  diagnosis  with  the  first  error  code.  Whatever  causes  the  first  error  code  may  also  cause  false  error  codes.  If  no  error  code  is  displayed,  see  whether  the  error  symptom  is  listed  in  the  Symptom-to-FRU  Index  for  the  computer  you  are  servicing.  Strategy  for  replacing  FRUs  for  CTO,  CMV,  and  GAV  Product  definition  Dynamic  Configure  To  Order  (CTO)This provides  the  ability  for  a  customer  to  configure  an  IBMfi  or  a  LenovoTM  solution  from  an  eSite,  and  have  this  configuration  sent  to  fulfillment,  where  it  is  built  and  shipped  directly  to  the  customer.  The  machine  label,  Product  Entitlement  Warehouse  (PEW),  eSupport,  and  the  HMM  will  load  these  products  as  the  4-digit  MT  and  3-digit  model,  where  model  =  CTO  (Example:  1829-CTO).  Custom  Model  Variant  (CMV)This is  a  unique  configuration  that  has  been  negotiated  between  IBM  or  Lenovo  and  the  customer.  A  unique  4-digit  MT  and  3-digit  model  is  provided  to  the  customer  to  place  orders  (Example:  1829-W15).  A  CMV  is  a  special  bid  offering.  Therefore,  it  is  NOT  generally  announced.  v  The  MTM  portion  of  the  machine  label  is  the  4-digit  MT  and  3-digit  model,  where  model  =  CTO  (Example:  1829-CTO).  The  PRODUCT  ID  portion  of  the  machine  label  is  the  4-digit  MT  and  3-digit  CMV  model  (Example:  1829-W15).  Important  service  information 4   MT  ThinkPadfi  ThinkPad  R60,  R60e,  R61,  and  R61i
 
	
		
			参考になったと評価
  
41人が参考になったと評価しています。
		 
		
 
			この取扱説明書が関連付けられている製品