1. 取扱説明書・マニュアル >
2. ペンタックス >
3. カメラ >
4. カメラ本体 >
5. デジタルカメラ >
6. PENTAX MX-1 の使い方、故障・トラブル対処法 >
7. PENTAX MX-1 の取扱説明書・マニュアル

MX-1の取扱説明書・マニュアル [全244ページ 14.71MB]

6* The temperature range for camera use is 0C to 40C (32F to 104F).* The display may appear black at high temperatures, but will return to normal at normal temperatures.* The display may respond more slowly at low temperatures. This is due to liquid crystal properties, and is not a malfunction.* Sudden temperature changes will cause condensation on the inside and outside of the camera. Place the camera in your bag or a plastic bag, and remove it after the temperatures of the camera and surroundings are equalized.* Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salt. These could cause the camera to breakdown. Wipe the camera to dry off any rain or water drops.* Do not press the display with excessive force. This could cause it to break or malfunction.* Be careful not to overtighten the tripod screw when using a tripod.* Do not clean the camera with organic solvents such as thinner, alcohol or benzine.* Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning as it may damage the lens.* Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera. Remove the camera from its case and store it in a dry and well-ventilated location.* Avoid using or storing the camera where it may be exposed to static electricity or electrical interference.* Avoid using or storing the camera in direct sunlight or where it may be exposed to rapid changes in temperature or to condensation.* Periodic inspections are recommended every one to two years to maintain high performance.Cleaning Your CameraStoring Your Camera

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.