MX-1の取扱説明書・マニュアル [全244ページ 14.71MB]
mx-1.pdf
http://www.pentax.jp/.../mx-1.pdf - 14.71MB
- キャッシュ
39662view
244page / 14.71MB
1072Taking Pictures1 Use the four-way controller ( 23) to select [Shake Reduction] in the [A Rec. Mode 2] menu, and press the four-way controller ( 5).A pull-down menu appears.2 Use the four-way controller ( 23) to select the Shake Reduction type, and press the 4 button.The setting is saved.The Face Detection function locates faces in the frame and automatically adjusts the focus and exposure for those faces. You can change the setting of the function so that the camera will automatically release the shutter when one or more of the subjects smile. The default setting is [On] for [Face Detection].*In 9 (Green) mode, the setting is fixed to [Sensor Shift].*In N (Handheld Night Snap) mode, the setting is fixed to [Dual].* [Dual] cannot be set in the following situations. When [Dual] has been selected, the setting is changed to [Sensor Shift]:- when . (Fireworks), X (Digital Wide), F (Digital Panorama) or p mode is selected as the capture mode- when the sensitivity is set to 3200 or higher- when g (Self-timer), j (Continuous Shooting), A (Burst Shooting(L)) or C (Burst Shooting(H)) is selected as the drive mode- when the flash mode is set to b (Flash On), G (Slow-speed Sync), F (Flash On + Red-eye), H (Slow-speed Sync+Red-eye) or I (Trailing Curtain Sync)- when the picture is taken without pressing the shutter release button halfway* For correcting camera shake in C (Movie) or c (Time-Lapse Movie) mode, use the Movie SR function (p.119).* When [Dual] is set, the optical correction is used whenever the camera can correct shaking optically.* The [Shake Reduction] setting can also be changed using the control panel.Setting the Face Detection FunctionOn The camera detects a person's face.SmileThe camera automatically release the shutter when your subject smiles.
参考になったと評価
23人が参考になったと評価しています。