1. 取扱説明書・マニュアル >
2. DELL >
3. パソコン >
4. パソコン本体 >
5. デスクトップパソコン >
6. OptiPlex G1 の使い方、故障・トラブル対処法 >
7. OptiPlex G1 の取扱説明書・マニュアル

OptiPlex G1の取扱説明書・マニュアル [全174ページ 1.59MB]

Internal Components: Dell OptiPlex GX1 Small-Form-Factor System User's Guidefile:///C|/infodev/2013/eDoc/OpGX1/UG/internal.htm [2/21/2013 11:47:17 AM]2. Touch an unpainted metal surface on the computer chassis, such as the metal around the card-slotopenings at the back of your computer, before touching anything inside your computer. 3. Disconnect the computer and peripherals from their electrical outlets. Doing so reduces the potential forpersonal injury or shock. Also disconnect any telephone or telecommunication lines from the computer.While you work, periodically touch an unpainted metal surface on the computer chassis to dissipateany static electricity that might harm internal components.In addition, Dell recommends that you periodically review the safety instructions in your System InformationGuide.Removing and Replacing the Computer CoverNOTE: If your small-form-factor chassis has an optional stand for vertical orientation attached to it,remove the optional stand before you remove the computer cover. To remove the computer cover, perform the following steps:1. Turn off your computer and peripherals, and observe the caution for your personal safety andprotection of the equipment described in " Safety First-For You and Your Computer."2. If you have installed a padlock through the padlock ring on the back panel, remove the padlock. 3. Remove the computer cover as follows:a. Press in on the two securing buttons until the cover is free to swing up (see Figure 1). b. Raise the back of the cover, and pivot it toward the front of the computer.c. Lift the cover off the hooks at the front of the chassis.Figure 1. Removing the Small-Form-Factor Computer Cover1Securing buttons (2)

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.