1. 取扱説明書・マニュアル >
2. DELL >
3. パソコン >
4. パソコン本体 >
5. デスクトップパソコン >
6. OptiPlex G1 の使い方、故障・トラブル対処法 >
7. OptiPlex G1 の取扱説明書・マニュアル

OptiPlex G1の取扱説明書・マニュアル [全174ページ 1.59MB]

Internal Components: Dell OptiPlex GX1 Small-Form-Factor System User's Guidefile:///C|/infodev/2013/eDoc/OpGX1/UG/internal.htm [2/21/2013 11:47:17 AM]Front of ComputerTo replace the computer cover, perform the following steps:1. Check all cable connections, especially those that might have come loose during your work. Foldcables out of the way so that they do not catch on the computer cover. Make sure cables are notrouted over the drive cage-they will prevent the cover from closing properly.2. Check to see that no tools or extra parts (including screws) are left inside the computer's chassis.3. Replace the computer cover as follows:a. Face the front of the computer and hold the cover at a slight angle as shown in Figure 2. b. Align the bottom of the cover with the bottom of the chassis, and insert the three hooks on thecover into the three recessed slots on the computer chassis so that the tabs catch the hooksinside the slots.NOTE: The three hooks on the cover are located in the front at the bottom. The threerecessed slots on the computer chassis are located in the front at the bottom (see Figure2).c. Pivot the cover down toward the back of the chassis and into position. Press down on the backcorners of the cover until the securing buttons click into place.Figure 2. Replacing the Small-Form-Factor Computer Cover1Securing buttons (2)2Hooks (3)3Recessed slots (3)

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.