Aspire 5741の取扱説明書・マニュアル [全2345ページ 37.05MB]
86056.pdf
http://153.127.244.43/.../86056.pdf - 37.05MB
- キャッシュ
134891view
2345page / 37.05MB
26EnglishFollow these steps again until the battery has been charged and discharged three times.Use this conditioning process for all new batteries, or if a battery hasn't been used for a long time. If the computer is to be stored for more than two weeks, you are advised to remove the battery pack from the unit.Warning: Do not expose battery packs to temperatures below 0C (32F) or above 45C (113F). Extreme temperatures may adversely affect the battery pack.By following the battery conditioning process you condition your battery to accept the maximum possib le charge. Failure to follow this procedure will prevent you from obtaining the maximum battery charge, and will also shorten the effective lifespan of the battery.In addition, the useful lifespan of the battery is adversely affected by the following usage patterns:* Using the computer on consta nt AC power with the battery inserted. If you want to use consta nt AC power, you are advised to remove the battery pack a fter it is fully charged.* Not discharging and recharging the battery to its extremes, as described above.* Frequent use; the more you use the battery, the faster it will reach the end of its effective life. A standard computer battery has a life span of about 300 charges.Installing and removing the battery packImportant! Before removing the batt ery from the unit, connect the AC adapter if you want to continue using your computer. Otherwise, turn off the computer first.To install a battery pack:1 Align the battery with the open battery bay; make sure that the end with the contacts will enter first, and that the top surface of the battery is facing up.2 Slide the battery into the battery bay and gently push until the battery locks in place.
参考になったと評価
52人が参考になったと評価しています。
その他の取扱説明書
1861 view