Aspire 3820の取扱説明書・マニュアル [全10ページ 0.18MB]
3
UN Test Data (Model:3UR18650-2-T0627)1.Test Item: Altitude simulation (T1)P.3/102.Test Purpose: This test simulates air transport under low-pressure conditions.3.Test Procedure: Test cells and batteries shall be stored at a pressure of 11.6kPa or less for at least six hours at ambient temperature(20+-5 ℃). SANYO Internal Procedure: As above.4.Test Requirements: No mass loss(less than 0.1%),no leakage,no venting,no disassembly,no rupture and no fire,and the voltage retention is not less than 90%. The requirement relating to voltage is not applicable to test batteries at fully discharged states.5.Test Date: 2010/1/72010/1/76.Test DataBefore test After test Before test After test1 327.73 327.78 0.015 12.95 12.94 99.9 0 PASS2 328.58 328.69 0.033 12.97 12.96 99.9 0 PASS3 328.44 328.46 0.006 12.97 12.97 100.0 0 PASS4 328.30 328.42 0.037 12.95 12.95 100.0 0 PASS5 327.63 327.42 0.064 0 PASS6 328.29 327.99 0.091 PASS7 328.08 328.10 0.006 0 PASS8 328.15 328.26 0.034 0 PASS9 328.60 328.56 0.012 12.97 12.97 100.0 0 PASS10 328.67 328.67 0.000 12.96 12.96 100.0 0 PASS11 327.57 327.32 0.076 12.97 12.97 100.0 0 PASS12 327.89 328.02 0.040 12.97 12.97 100.0 0 PASS13 327.33 327.37 0.012 0 PASS14 327.78 328.02 0.073 0 PASS15 328.51 328.65 0.043 0 PASS16 328.31 328.36 0.015 0 PASSNotes: L-Leakage, V-Venting, D-Disassembly, R-Rupture, F-Fire, 0-No leakage, no venting, no disassembly, no rupture & no fireOthereventResult Judgement At firstcycle,infullychargedstatesPASSAt firstcycle,infullydischargedstatesAfter 50cyclesending infullychargedstatesAfter 50cyclesending infullydischargedstatesBattery No.Mass(g)Mass loss(%)(=<0.1%)Voltage(V)VoltageRetention(%)(=>90%)
