Aspire 3820の取扱説明書・マニュアル [全11ページ 0.16MB]
5
UN Test Data (Model:3UR18650-3-T0664)1.Test Item: Impact (T6) P.8/102.Test Purpose: This test simulates an impact.3.Test Procedure: The test sample cell or component cell is to be placed on a flat surface. A 15.8mm diameter bar is to be placed across the center of the sample. A 9.1kg mass is to be dropped from a height of 61+-2.5cm onto the sample. A cylindrical or prismatic cell is to be impacted with its longitudinal axis parallel to the flat surface and perpendicular to the longitudinal axis of the 15.8mm diameter curved surface lying across the centre of the test sample. A prismatic cell is also to be rotated 90 degrees around its longitudinal axis so that both the wide and narrow sides will be subjected to the impact. Each sample is to be subjected to only a single impact. Separate samples are to be used for each impact. A coin or button cell is to be impacted with the flat surface of the sample parallel to the flat surface and the 15.8mm diameter curved surface lying across its center. SANYO Internal Procedure: As above.4.Test Requirements: External temperature of test batteries does not exceed 170AC and there is no disassembly and no fire within six hours of this test.5.Test Date: 2007/11/126.Test Data :10 PASS20 PASS30 PASS40 PASS50 PASS678PASS910110 PASS120 PASS130 PASS140 PASS150 PASS1617181920Notes: D-Disassembly, F-Fire, 0-No disassembly & no fire After 50cyclesending, infullydischargedstates5859605153126Cell No. Maximum Temperature(7C)OthereventResult Judgement At firstcycle, 50%chargedstates129126131128
