1. 取扱説明書・マニュアル >
2. カメラ >
3. カメラ本体 >
4. ビデオカメラ

キヤノン ビデオカメラの取扱説明書・マニュアル [全186ページ 9.95MB]

Menu OptionsMenu itemSubmenu1234567ASetting options[Firmware]Ü–––Not available in the [Photos] index screen.The default value depends on the country/region or purchase.Setting options for [Assign Button]: [(NONE)], [Peaking], [Zebra], [WFM (LCD)], [Edge Monitor], [Magnification], [Color Bars],[Markers], [LCD Setup], [VF Setup], [LCD/VF B&W], [Onscreen Display], [Add Shot Mark 1], [Add Shot Mark 2], [Add $ Mark],[Add % Mark], [Time Code], [Time Code Hold], [Headphone +], [Headphone -], [Audio Output CH], [Audio Level], [Photo],[FUNC.], [FUNC. Shutter], [FUNC. ISO/Gain], [FUNC. WB], [My Menu], [Initialize Media], [User Setting (NONE)].The default settings are as follows. [1]: [Magnification], [2]: [Peaking], [3]: [Zebra], [4]: [WFM (LCD)], [5]: [Headphone +], [6]:[Headphone -], [7]: [Magnification], [8]: [WFM (LCD)], [9]: [Edge Monitor], [10] to [15]: [(NONE)].Available in the clip index screen only.Available in the clip index screen and [$ Mark] index screen only.Available in the [Photos] index screen only.Only appears when the optional WFT-E6 Wireless File Transmitter is attached to the camcorder.155[Reset]: Reset various camcorder settings.[All Settings]: Resets all the camcorder’s settings to default settings, except for the hour meter.[Camera Settings]: Resets the white balance, iris (# only), ISO speed, gain, shutter speed, [~ CameraSetup] settings and custom picture settings to default settings.[Assignable Buttons]: Resets the assignable buttons to default settings.[Tally Lamp]: Allows you to set whether the tally lamp illuminates while the camcorder is recording.YPO[Media Access LED]: Allows you to set whether the CF card access indicators or the SD card access indicatorilluminates while the camcorder is accessing a CF card or SD card.[Genlock Adjust.]: The phase difference between the external Genlock signal and the camcorder is initially set to0. This function allows you to adjust it within the range of approx. ±0.4 H (-1023 to 1023). When setting to 1000or more or -1000 or less, set the first field to 10 or -10, respectively.[Clips] settingsC[Title Prefix]: Determines the first 2 characters of the clip name. Combined with the [Number Setting] setting,this constitutes the 6-character clip name.[Number Setting]: Determines the last 4 digits of the clip name. Combined with the [Title Prefix] setting, thisconstitutes the 6-character clip name. Select [Set] to assign a desired number to the first clip you record orselect [Reset] to reset the number to [0001].The numerals increase every time a clip is recorded.[Delete Last Clip]: Deletes the last clip you recorded. This setting option will not appear if you turned thecamcorder off since recording the last clip.[Country Code]: This identifier is the country code defined by ISO-3166-1 and is to be entered starting from the left.[Organization]: This identifier represents the organization that owns or operates the camcorder and can beobtained by registering with the SMPTE Registration Authority. If the organization is not registered, enter [0000].[User Code]: This identifier designates the user. Leave this blank if [Organization] is set to [0000].[SDI Rec Command]: When you connect the camcorder to another device using the HD/SD SDI terminal, if youstart or stop recording with the camcorder, the other device will also start or stop recording.[Reset Hour Meter]: The camcorder has two “hour meters” – the first keeps track of total operation time and thesecond keeps track of operation time since the last time the second hour meter was reset with this function.[Firmware]: You can verify the current version of the camcorder’s firmware. This menu option is usually unavailable.[My Menu] (mode only)Menu item[Edit]SubmenuSetting options[Register][Cancel], [OK][Move][Cancel], [OK][Delete][Cancel], [OK][Reset All][Cancel], [OK]A30

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.