1. 取扱説明書・マニュアル >
2. カメラ >
3. カメラ本体 >
4. ビデオカメラ

キヤノン ビデオカメラの取扱説明書・マニュアル [全186ページ 9.95MB]

Adding Marks while RecordingAdding Marks while Recording90When recording, you can flag an important shot in a clip by adding a “shot mark” (!). There are two types ofshot marks, shot mark 1 (") and shot mark 2 (#), and you can add either or both types to a single clip. You canalso add an OK mark ($) or check mark (%) to the entire clip to flag clips you want to set apart. You can add allfour types of marks remotely using the Wi-Fi Remote application.When the camcorder is inmode, you can add or delete shot marks (A 124). You can also display anindex screen of all the shot marks (A 123), allowing you to find a particular scene in a clip more quickly.Operating modes:Adding Shot Marks while RecordingTo add a shot mark to a clip while recording, you must first set in advance an assignable button to [Add ShotMark 1] or [Add Shot Mark 2].1 Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2] (A 99).• To add both shot marks, set one assignable button to [Add Shot Mark 1] and another assignable button to[Add Shot Mark 2].YPO2 While you are recording, press the assignable button at the beginning of the shot you wish to mark.• A message indicating the short mark will appear and the selected shot mark will be added to the currentframe of the clip.• You can press the button again to add another shot mark. Up to 100 shot marks (" and # markscombined) can be added to a single clip.CRemote Operation Using Wi-Fi RemoteAfter completing the necessary preparations (A 47) you can set a shot mark (" or #) remotely from a Wi-Fienabled device using the Wi-Fi Remote application.1 While recording a clip, press [SHOT MARK1] on the Wi-Fi Remote screen to set a shot mark 1 or[SHOT MARK2] to set a shot mark 2.• [Shot Mark1] or [Shot Mark2] will be displayed on the Wi-Fi Remote screen and the shot mark will be appliedto the clip.2 Pressto close the message.

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.