1. 取扱説明書・マニュアル >
2. カメラ >
3. カメラ本体 >
4. ビデオカメラ

キヤノン ビデオカメラの取扱説明書・マニュアル [全186ページ 9.95MB]

TroubleshootingList of MessagesRefer to this section if a message appears on the screen. The messages in this section appear in alphabeticalorder. For error messages related to the optional WFT-E6 Wireless File Transmitter refer to the Troubleshootingsection of the ‘WFT-E6 Wireless File Transmitter - Guide for Canon Camcorders’ (A 34).Accessing CF A/CF B Do not remove- You opened the CF card slot cover while the camcorder was accessing the CF card. Close the CF card slot cover.Cannot acquire battery information- Battery information can be displayed only for batteries bearing the Intelligent System mark.Cannot communicate with the battery pack. Continue using this battery pack?- You attached a battery pack that does not bear the Intelligent System mark.- If you are using a battery pack that bears the Intelligent System mark, there may be a problem with the camcorder orbattery pack. Consult a Canon Service Center.Cannot play back- The file control information is corrupted or there was a decoder error. Turn off the camcorder and back on again. If thisdoes not solve the problem, consult a Canon Service Center.• Corrupted file control information cannot be recovered. CF cards or clips with corrupt file control information cannotbe read by the supplied Canon XF Utility or plugins.Cannot record- The file control information is corrupted or there was an encoder error. Turn off the camcorder and back on again.Then, remove the CF card being used and reinsert it. Alternatively, replace the CF card. If this does not solve theproblem, consult a Canon Service Center.• Corrupted file control information cannot be recovered. CF cards or clips with corrupt file control information cannotbe read by the supplied Canon XF Utility or plugins.YPOCannot switch CF card slots- The SLOT SELECT button was pressed while the camcorder is recording. Wait until recording is finished to change theselected CF card slot.CF A/CF B Buffer overflow. Recording was stopped.- The data transfer rate was too high for the CF card in use and the recording was stopped. Use a recommended card(A 41).CCF A/CF B Cannot restore- Could not recover data on the CF card. Save your clips (A 132) and initialize the CF card (A 43).CF A/CF B error- The CF card cannot be recognized or cannot be accessed. Check that the CF card is inserted correctly and notmalfunctioning.CF A/CF B Management data is not supported and will be deleted- This message may appear if you insert into the camcorder a CF card that was initialized by another Canonprofessional camcorder. Check the contents of the CF card.CF A/CF B Management file error Cannot record- Cannot record because the camcorder cannot write to the file control information. This may occur if the files on the CFcard were accessed using another device. Save your clips (A 132) and initialize the CF card (A 43).• During double slot recording, both “CF A” and “CF B” will appear in the message.CF A/CF B Media full- CF card A or CF card B is full so recording will not start. Switch to the CF card in the other CF card slot to record.CF A/CF B Media is not supported- CF cards that are less than 512 MB or not UDMA-compatible cannot be used with the camcorder. Use arecommended CF card (A 41).CF A/CF B Number of clips already at maximum- The CF card selected for recording already contains the maximum number of clips (999 clips). Replace the CF card oruse the CF card in the other CF card slot.- Because both CF cards reached the maximum number of clips, double slot recording is not available.• During double slot recording, both “CF A” and “CF B” will appear in the message.CF A/CF B Reached the recording limit for one clip. Recording was stopped.- When recording a single clip for an extended period of time, the clip will be split into smaller video files every 2 GB (or1 GB when recording in slow motion). This message will appear when the number of smaller video files reaches 99.165

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.