キヤノン ビデオカメラの取扱説明書・マニュアル [全186ページ 9.95MB]
eosc300-eosc300pl-im4-c-en.pdf
Gizbot 2013-08-19
http://gdlp01.c-wss.com/.../eosc300-eosc300pl-im4-c-en.pdf - 9.95MB
- キャッシュ
22048view
186page / 9.95MB
Recording Video• You can use [w Other Functions] > [Clips] > [Delete Last Clip] (A 154) to delete the last clip recorded.However, you cannot delete the last clip if double slot recording is on.• When you set the [w Other Functions] > [SDI Rec Command] setting to [On] and you connect thecamcorder to another device using the HD/SD SDI terminal, if you start or stop recording with the camcorder,the other device will also start or stop recording.Locking the Controls in Recording ModeOnce inmode, you can set the Q switch to C (key lock)to lock all the physical controls (buttons and switches) on thecamcorder*, save for the START/STOP button. In such case, you canuse Wi-Fi Remote to operate the camcorder. This is useful inpreventing settings from being changed due to inadvertently pressingone of the buttons. Return the Q switch to the CAMERAposition to reactivate the controls.* The Wi-Fi Remote application also has a key lock function that is limited only tothe controls on the application’s screens (you will still be able to use the controlson the camcorder). Press [ ] to lock the application’s controls; press [C] toreactivate them.About ClipsYPOWhen the camcorder records a clip, it also assigns a 6-character clip name consisting of a 2-character prefix(letters or numerals) and 4 numerals (for example, “AA0001”). The last 4 numbers serve as a running counterthat increases every time a clip is recorded. You can set the initial clip name in advance using the [w OtherFunctions] > [Clips] > [Title Prefix] and [Number Setting] settings. You cannot change the clip name afterthe clip is recorded.CNOTES• If you are recording with two CF cards and the CF card you are using becomes full while recording, the clipwill continue uninterrupted on the other CF card when relay recording (A 44) is activated. In such case,the recording will be recorded as separate clips.• If you record using the custom picture and metadata settings, those settings will be recorded with the clip.For more details, refer to Custom Picture Settings (A 101) and Using Metadata (A 85).• The video (stream) file in a clip will be split approximately every 2 GB for clips with a long recording time(approximately every 1 GB during slow motion recording). Even in such case, playback will be continuous.51
参考になったと評価
48人が参考になったと評価しています。
この取扱説明書が関連付けられている製品