fIXIng tHe rX-fX to a wallCAUTION: You will need to determine where the RX-FX will be ixed and the structure of the wall. For safety reasons, if you are unsure of your ability to provide a secure and safe ixing, do not attempt to ix these speakers to your wall, please obtain the services of a competent and qualiied trades person.CAUTION: Ensure that there are no water pipes or electricity cables running behind where the wall brackets are going to be secured. Work from secure steps and avoid trailing wires.We do not supply wall ixing screws and plugs with the RX-FX. Please use suitable ixings for the type of wall construction the RX-FX’s will be ixed to.To ix your RX-FX’s to the wall, we would recommend using the wall ixing template enclosed within the packaging cartonPlIntH fIXIng(RX6 & RX8 only)The Silver RX6 & RX8’s are provided with plinths to improve stability and acoustic response. The plinths are secured in place by using the supplied M8 bolts.Before you it the plinth ensure the loor area is clear of any hard/sharp objects. To it the plinth turn the cabinet over so that the bottom is facing upwards. Then, place the plinth onto the cabinet ensuring the plinth is orientated correctly, lining up the bolt holes in the plinth with the inserts in the cabinet. Using the bolts, secure the plinth to the cabinet. Tighten them up gradually at irst and ensure the plinth is itted securely to the cabinet. Fit the feet to the plinth before turning the loudspeaker back over. (Please read the instructions opposite). The spikes are used to improve sound quality and bass performancegrIllesAll of the Silver RX speakers come with grilles covered in acoustically transparent cloth. The grilles are held invisibly in place by magnets in both the grille and the cabinet (except RX-FX).To it them, irstly ensure they are the correct way up (badge at the bottom) and offer them up to the cabinet. The magnets should them pull it into position.The RX-FX comes with the grilles factory itted. If you wish to remove them, carefully prize them away from the cabinet with the tips of your ingers. There are three separate grilles itted to each RX-FX cabinet.CAUTION: Do not lift or move the loudspeaker with the grilles itted. If any movement needs to be done, please remove the grilles irst.silver RX 10Silver RX Manual.indd 10 03/06/2009 16:18:14
