1. 取扱説明書・マニュアル >
2. パソコン >
3. パソコン本体 >
4. ノートパソコン

東芝 ノートパソコンの取扱説明書・マニュアル [全72ページ 3.72MB]

57付 録4技術基準適合についてCE complianceThis product is labelled with the CE Mark in accordance with the related European Directives, notably Electromagnetic Compatibility Directive 2004/108/EC for the notebook and the electronic accessories including the supplied power adapter, the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC in case of implemented telecommunication accessories and the Low Voltage Directive 2006/95/EC for the supplied power adapter. Furthermore the product complies with the Ecodesign Directive 2009/125/EC (ErP) and its related implementing measures.This product and the original options are designed to observe the related EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards. To avoid general EMC problems, the following guidance should be noted:■ Only CE marked options should be connected/implemented■ Only best shielded cables should be connectedWorking environmentThis product was designed to fulil the EMC (Electromagnetic Compatibility) requirements to be observed for so-called “Residential, commercial and light industry environments”. TOSHIBA do not approve the use of this product in working environments other than the above mentioned “Residential, commercial and light industry environments”.For example, the following environments are not approved:■ Industrial Environments (e.g. environments where a mains voltage of 380 V three-phase is used)■ Medical Environments■ Automotive Environments■ Aircraft EnvironmentsAny consequences resulting from the use of this product in working environments that are not approved are not the responsibility of TOSHIBA.The consequences of the use of this product in non-approved working environments may be:■ Interference with other devices or machines in the near surrounding area.■ Malfunction of, or data loss from, this product caused by disturbances generated by other devices or machines in the near surrounding area.Therefore TOSHIBA strongly recommend that the electromagnetic compatibility of this product should be suitably tested in all non-approved working environments before use. In the case of automobiles or aircraft, the manufacturer or airline respectively should be asked for permission before use of this product.Furthermore, for general safety reasons, the use of this product in environments with explosive atmospheres is not permitted.

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.