Lenovo  ノートパソコンの取扱説明書・マニュアル [全268ページ 6.46MB]
	 
	
	
	
	
		
			
				
				
					42x3749_02.pdf
					
					
					Gizbot 2013-09-01
					http://download.lenovo.com/.../42x3749_02.pdf - 6.46MB 
 - キャッシュ 
					
						11811view
					
					268page / 6.46MB
					
					
				 
				
			 
		 
	 
 
	 
 
	
	
	
		
		
	
	
	
	After  the  POST  ends,  the  password  prompt  does  not  appear.  The  POP  has  been  removed.  5.  Reinstall  the  backup  battery  and  the  battery  pack.  (B)  If  an  SVP  has  been  set  and  is  known  by  the  servicer:  1.  Turn  on  the  computer;  then,  while  the  To  interrupt  normal  startup,  press  the  blue  ThinkVantagefi  button  message  is  displayed  at  the  lower-left  of  the  screen,  press  the  ThinkVantage  button.  The  Rescue  and  Recovery  screen  opens.  For  models  supporting  the  Passphrase  function,  press  F1  while  the  POP  icon  is  appearing  on  the  screen;  then  enter  the  POP.  For  the  other  models,  enter  the  POP.  Note:  To  check  whether  the  ThinkPad  computer  supports  the  Passphrase  function,  enter  the  BIOS  Setup  Utility  and  go  to  Security  -->  Password.  If  the  Using  Passphrase  item  is  displayed  in  the  menu,  this  function  is  available  on  the  ThinkPad  computer.  2.  Click  Access  BIOS.  The  system  Restart  Required  window  is  displayed.  3.  Click  Yes.  The  computer  restarts,  and  the  BIOS  Setup  Utility  screen  opens.  4.  Select  Security,  using  the  cursor  directional  keys  to  move  down  the  menu.  5.  Select  Password.  6.  Select  Power-On  Password.  7.  Type  the  current  SVP  in  the  Enter  Current  Password  field.  then  leave  the  Enter  New  Password  field  blank,  and  press  Enter  twice.  8.  In  the  Changes  have  been  saved  window,  press  Enter.  9.  Press  F10;  then,  in  the  Setup  confirmation  window,  select  Yes  .How  to  remove  the  hard-disk  password  Attention:   If  User  only  mode  is  selected  and  the  user  HDP  has  been  forgotten  and  cannot  be  made  available  to  the  servicer,  neither  Lenovo  nor  Lenovo  authorized  servicers  provide  any  services  to  reset  the  user  HDPs  or  to  recover  data  from  the  hard  disk  drive.  The  hard  disk  drive  can  be  replaced  for  a  scheduled  fee.  To  remove  a  user  HDP  that  has  been  forgotten,  when  the  SVP  and  the  master  HDP  are  known,  do  the  following:   1.  Turn  on  the  computer;  then,  while  the  To  interrupt  normal  startup,  press  the  blue  ThinkVantage  button  message  is  displayed  at  the  lower-left  of  the  screen,  press  the  ThinkVantage  button.  The  Rescue  and  Recovery  screen  opens.  For  models  supporting  the  Passphrase  function,  press  F1  while  HDP  icon  is  appearing  on  the  screen;  then  enter  the  master  HDP.  For  the  other  models,  enter  the  master  HDP.  Note:  To  check  whether  the  ThinkPad  computer  supports  the  Passphrase  function,  enter  the  BIOS  Setup  Utility  and  go  to  Security  -->  Password.  If  Using  Passphrase  item  is  displayed  in  the  menu,  this  function  is  available  on  the  ThinkPad  computer.   2.  Click  Access  BIOS.  The  system  Restart  Required  window  is  displayed.   3.  Click  Yes.  The  computer  restarts,  and  the  BIOS  Setup  Utility  screen  opens.   4.  Select  Security,  using  the  cursor  directional  keys  to  move  down  the  menu.   5.  Select  Password.   6.  Select  Hard-disk  x  password,  where  x  is  the  letter  of  the  hard  disk  drive.  A  pop-up  window  opens.  Related  service  information 24   MT  ThinkPadfi  ThinkPad  R60,  R60e,  R61,  and  R61i
 
	
		
			参考になったと評価
  
41人が参考になったと評価しています。
		 
		
 
			この取扱説明書が関連付けられている製品