SEnSuS InfOtAInMEnt - tEL*/bLuEtOOth® MODETEL*/bLUETOOTh® MOdEIf you are not already in this mode’s normal view, press TEL* on the centre console to access all of the telephone features and to use bluetooth® to pair bluetooth®-enabled phones or other external devices.PAIrINg A bLUETOOTh® dEVICE WITh SENSUS INFOTAINMENTMethod 1 Search for the external device using the Sensus Infotainment menus (this example assumes that there are no devices connected).1. be sure that the external device is discoverable (that its bluetooth® function is activated) and fol-low the instructions on the Sensus Infotainment screen.2. Press the thumb wheel or OK and follow the direc-tions displayed on the Sensus Infotainment screen. The external device is now paired to Sensus Infotain-ment.If this procedure has not functioned, press EXIT twice and continue to method 2.Method 2 Search for the car using the external device’s blue-tooth® function. 1. Make the car discoverable by scrolling to Phone settings and pressing the thumb wheel or OK . Discoverable will be displayed. Press the thumb wheel or OK . 2. Select My Volvo Car on the external device’s screen and follow the directions provided.3. Enter a PIN code of your choice in the external device and press its button to pair the device. Press the thumb wheel or OK and enter the same PIN code in the car using the centre console keypad.The external device’s name will displayed on the car’s screen and it is now paired to Sensus Infotainment.ShOrTCUT VIEW (COMMON PhONE FUNC-TIONS)From telephone mode’s normal view, press TEL* again to display the shortcut menu. Scroll to the desired alternative and press the thumb wheel or OK . Press EXIT to return to telephone mode’s normal view.QUICk ACCESS TO ThE CONNECTEd PhONE’S LIST OF CONTACTS (PhONE bOOk)1. If you are not already in tEL* mode, press TEL to enter telephone mode’s normal view.2. Turn the thumb wheel or TUNE to display the list of contacts. Continue turning to scroll through the list.Press the thumb wheel or OK to select a contact. If there is only one phone number for this contact, a call will be initiated. If there are several phone numbers, scroll to the desired one and press the thumb wheel or OK to initiate a call.ChANgINg PhONES (Or OThEr dEVICES)Two bluetooth® devices (e.g., a phone and an iPod®) can be active at the same. however, two phones can-not be used at the same time to make calls. To change the currently connected phone:1. Press TEL* to enter telephone mode’s normal view.2. Press TEL* again to display the shortcut menu. 3. Scroll to Change phone and press the thumb wheel or OK .4. Scroll to the desired phone and press the thumb wheel or OK to select it. This phone can now be used to make or receive calls, etc.you will then be returned to the telephone mode’s normal view.
