1. 取扱説明書・マニュアル >
2. パソコン >
3. パソコン周辺機器 >
4. モニタ・ディスプレイ

ソニー モニタ・ディスプレイの取扱説明書・マニュアル [全76ページ 3.35MB]

Precaution43 PrecautionOn Safety Operate the unit only with a power source as specified in the "Specifications" section. A nameplate indicating operating voltage, power consumption, etc., is located on the rear panel. Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. Do not drop or place heavy objects on the power cord. If the power cord is damaged, turn off the power immediately. It is dangerous to use the unit with a damaged power cord. Unplug the unit from the wall outlet if it is not to be used for several days or more. Disconnect the power cord from the AC outlet by grasping the plug, not by pulling the cord. The socket-outlet shall be installed near the equipment and shall be easily accessible.On Installation Allow adequate air circulation to prevent internal heat build-up.Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation holes. Do not install the unit in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.When installing the installation space must be secured in consideration of the ventilation and service operation. Do not block the ventilation slots, and vents of the fans. Leave a space around the unit for ventilation. Leave more than 40 cm of space in the rear of the unit to secure the operation area.When the unit is installed on the desk or the like, leave at least 1U (4.4cm) or more of space above and below the unit. Leaving 40 cm or more of space above the unit is recommended for service operation.Handling the Screen The panel fitted to this unit is manufactured with high precision technology, giving a functioning pixel ratio of at least 99.99%. Thus a very small proportion of pixels may be "stuck", either always off (black), always on (red, green, or blue), or flashing. In addition, over a long period of use, because of the physical characteristics of the panel, such "stuck" pixels may appear spontaneously. These problems are not a malfunction. Do not leave the screen facing the sun as it can damage the screen. Take care when you place the unit by a window. Do not push or scratch the monitor's screen. Do not place a heavy object on the monitor's screen. This may cause the screen to lose uniformity. The screen and the cabinet become warm during operation. This is not a malfunction.On Burn-inDue to the characteristics of the material used in the OLED panel for its high-precision images, permanent burn-in may occur if still images are displayed in the same position on the screen continuously, or repeatedly over extended periods.Images that may cause burn-in Masked images with aspect ratios other than 16:9 Color bars or images that remain static for a long time Character or message displays that indicate settings or the operating state On-screen displays such as center markers or area markersTo reduce the risk of burn-in Turn off the character and marker displaysPress the MENU button to turn off the character displays. To turn off the character or marker displays of the connected equipment, operate the connected equipment accordingly. For details, refer to the operation manual of the connected equipment. Turn off the power when not in useTurn off the power if the viewfinder is not to be used for a prolonged period of time.Screen saverThis product has a built-in screen saver function to reduce burn-in. When an almost still image is displayed for more than 10 minutes, the screen saver starts automatically and the brightness of the screen decreases.On a Long Period of UseDue to an OLED's panel structure and characteristics of materials in its design, displaying static images for extended periods, or using the unit repeatedly in a high temperature/high humidity environments may cause image smearing, burn-in, areas of which brightness is permanently changed, lines, or a decrease in overall brightness.

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.