Bronze BX 8Plinth Fi Xing(BX5 & BX6 only)The Bronze BX5 & BX6’s are provided with plinths to improve stability and acoustic response. The plinths are secured in place by using the supplied bolts.Before you it the plinth ensure the loor area is clear of any hard/sharp objects. To it the plinth turn the cabinet over so that the bottom is facing upwards. Then, place the plinth onto the cabinet ensuring the plinth is orientated correctly, lining up the bolt holes in the plinth with the inserts in the cabinet. Using the bolts, secure the plinth to the cabinet. Tighten them up gradually at irst and ensure the plinth is itted securely to the cabinet. Fit the feet to the plinth before turning the loudspeaker back over. (Please read the instructions opposite). The spikes are used to improve sound quality and bass performancesP ikes and Feet The loorstanders from the Bronze BX Series come with spikes and separate rubber feet. The spikes are to be used on carpeted loors and the rubber feet for use on hard loors where spikes are not appropriate.The spikes screw into the threaded inserts on the underside of the plinth. If you do not wish to use the plinth, spikes can be ixed directly into the bottom of the cabinet. Ensure there are no trailing cables where the speakers will be sited.NOTE: When used without the plinth the stability of the cabinet will be reduced because the cabinet footprint will be reduced.When used on hard loor, the rubber feet simply push into the same inserts that would usually be occupied by the spikes.Bronze BX Manual.indd 8 10/03/2010 10:55:34
