Z4 H7の解決方法
Q&A
取扱説明書・マニュアル (文書検索対応分のみ)
"H7"1 件の検索結果
"H7"5 件の検索結果
全般
質問者が納得問題無く取り付け出来ます。ベロフ、PIAA、などがお勧めです。5000〜6700Kの中から選べば車検対応で安心です。2万円以下のキットは避けるべきですよ！
4551日前view270
ReferenceAt a glanceControlsDriving tipsMobility 891.Open the caps with a suitable object, e.g. a coin or screwdriver2.Fold up the protective cover in the wheel well.Headlamp cover1.Pull the wire clamp out straight2.Pull the wire clamp past the catches, see arrows, and fold it down3.Flip the headlamp cover open and remove.Reinstall the headlamp cover care-fully. If it is not on tight, the headlamp installation could be damaged. <Reinstall the headlamp cover in reverse order.Low beams and high beamsLeft side...
ReferenceAt a glanceControlsDriving tipsMobility 9555-watt bulb, H7The H7 bulb is pressurized. Therefore, wear safety glasses and protective gloves. Otherwise there is a risk of injury if the bulb is damaged.<1.Turn the bulb socket counterclockwise and take it out.2.Remove and replace the bulb.3.Insert bulb socket.Side marker lamps, front5-watt bulb, W5W1.Take out bulb socket.2.Remove and replace the bulb.3.Insert bulb socket.Front turn signal indicators21-watt bulb, H211.Insert a Phillips-head screwdriver ...
Replacing components10055-watt bulb, H7The H7 bulb is pressurized. Therefore, wear safety glasses and protective gloves. Otherwise there is a risk of injury if the bulb is damaged.<1.Turn the bulb socket counterclockwise and take it out.2.Remove and replace the bulb.3.Insert bulb socket.Side marker lamps, front5-watt bulb, W5W1.Take out bulb socket.2.Remove and replace the bulb.3.Insert bulb socket.Front turn signal indicators21-watt bulb, H211.Insert a Phillips-head screwdriver from the onboard tool kit in...
Replacement procedures921.Open the caps with a suitable object, e.g. a coin or screwdriver2.Fold up the protective cover in the wheel well.Headlamp cover1.Pull the wire clamp out straight2.Pull the wire clamp past the catches, see arrows, and fold it down3.Flip the headlamp cover open and remove.Reinstall the headlamp cover carefully. If it is not on tight, th e headlamp installation could be damaged. <Reinstall the headlamp cover in reverse order.Low beams and high beamsLeft side of engine compartment:1...
Replacing components10055-watt bulb, H7The H7 bulb is pressurized. Therefore, wear safety glasses and protective gloves. Otherwise there is a risk of injury if the bulb is damaged.<1.Turn the bulb socket counterclockwise and take it out.2.Remove and replace the bulb.3.Insert bulb socket.Side marker lamps, front5-watt bulb, W5W1.Take out bulb socket.2.Remove and replace the bulb.3.Insert bulb socket.Front turn signal indicators21-watt bulb, H211.Insert a Phillips-head screwdriver from the onboard tool kit in...
- 1
- 1
