21CT200h_QG_OM76087U_(U)Power (Ignition) Switch■Starting the hybrid systemCheck that the parking brake is set.Firmly depress the brake pedal.Check that the "POWER" switchindicator turns green. If the indicatordoes not turn green, the hybrid sys-tem cannot be started. When the shift position is N, thehybrid system cannot start. Shift theshift position to P, when starting thehybrid system. (→P.24)Press the "POWER" switch.Continue depressing the brake pedaluntil the hybrid system is completelystarted.The hybrid system can be startedfrom any "POWER" switch mode.Check that the "READY" indicator is on.If the "READY" indicator changes from a flas hing light to a solid light and the buzzersounds, the hybrid system is starting normally.The vehicle will not move when the "READY" indicator is off.The vehicle can move when the "READY" indica tor is on even if the engine is stopped.(The gasoline engine starts or stops automatically in accordance with the state of thevehicle.)Performing the following operations when carrying the electronic key on your personstarts the hybrid system or changes "POWER" switch modes.
