24CT200h_QG_OM76087U_(U)■Shift position purpose*: For good fuel economy and noise reduction, the D position should usually be used.■P position switch■When shifting the shift position to PFully stop the vehicle and set the parkingbrake, and then press the P position switch.When the shift position is changed to P,the switch indicator comes on.Check that the P position is illuminatedon the shift position indicator.■Shifting the shift position from P to other positions●While depressing the brake pedal firmly, oper ate the shift lever. If the shift lever isoperated without depressing the brake peda l, the buzzer will sound and the shiftingoperation will be disabled.●When selecting the shift position, make sure that the shift position has been changedto the desired position by checking the shift position indicator provided on the instru-ment cluster.●The shift position cannot be changed from P to B directly.Shift position FunctionP Parking the vehicle/starting the hybrid systemR ReversingN NeutralDNormal driving *BApplying engine braking or strong braking when the accelerator pedal has been released on steep downward slopes etc.
