2202-3. Operating the lights and windshield wipersCT200h_U (OM76040U)■Raindrop sensor (vehicles with rain-sensing windshield wipers)●If the wiper switch is turned to the "AUTO" position while the "POWER" switchis in ON mode, the wipers will operate once to show that AUTO mode is acti-vated.●If the temperature of the raindrop sensor is 194 °F (90 °C) or higher, or 5 °F(-15 °C) or lower, automatic operation may not occur. In this case, operate thewipers in any mode other than "AUTO".■If no windshield washer fluid spraysCheck that the washer nozzles are not blocked if there is washer fluid in the washerfluid tank.CAUTION■Caution regarding the use of windshield wipers in "AUTO" mode (vehicles withrain-sensing windshield wipers)The windshield wipers may operate unexpect edly if the sensor is touched or thewindshield is subject to vibration in "AUTO" mode. Take care that your fingers etc.do not become caught in the windshield wipers.●The raindrop sensor judges the amount ofraindrops. An optical sensor is adopted. It may notoperate properly when sunlight from therising or setting of the sun intermittentlystrikes the windshield, or if bugs etc. arepresent on the windshield.
