2122-3. Operating the lights and windshield wipersCT200h_U (OM76004U)nRaindrop sensor (vehicles with rain-sensing windshield wipers)lIf the wiper switch is turned to the "AUTO" position while the "POWER" switch is in ON mode, the wipers will operate once to show that AUTO mode is acti-vated.lIf the temperature of the raindrop sensor is 194 °F (90 °C) or higher, or 5 °F (-15 °C) or lower, automatic operation may not occur. In this case, operate the wipers in any mode other than "AUTO".nIf no windshield washer fluid spraysCheck that the washer nozzles are not blocked if there is washer fluid in the washer fluid tank.CAUTIONnCaution regarding the use of windshield wipers in "AUTO" mode (vehicles with rain-sensing windshield wipers)The windshield wipers may operate unexpect edly if the sensor is touched or the windshield is subject to vibration in "AUTO" mode. Take care that your fingers etc. do not become caught in the windshield wipers.lThe raindrop sensor judges the amount of raindrops. An optical sensor is adopted. It may not operate properly when sunlight from the rising or setting of the sun intermittently strikes the windshield, or if bugs etc. are present on the windshield.
