130GS350_U (OM30C34U)3-3. Adjusting the seatsDriving position memoryCheck that the shift lever is in P.Turn the engine switch to IGNITION ON mode.Adjust the driver's seat, steering wh eel, and outside rear view mirrors tothe desired positions. (When memorizing the front passenger's seat,adjust the front passenger's seat to the desired positions.)While pressing the "SET" button,or within 3 seconds after the"SET" button is pressed, pressbutton "1", "2" or "3" until the sig-nal beeps.If the selected button has alreadybeen preset, the previously recordedposition will be overwritten.Your preferred driving position (the position of the driver's seat, steer-ing wheel and outside rear view mirrors) can be memorized andrecalled by pressing a button. It is also possible to set this function toactivate automatically when the doors are unlocked.Three different driving positions can be entered into memory. The same buttons are found on the front passenger's side, allowing theposition of the front passenger's seat to be memorized (if equipped).Entering a position to memory1234
