4711-3. Adjustable components (seats, mirrors, steering wheel)Before drivingGS_G_UMarch 29, 2010 3:11 pmDriving position memory system (if equipped)Your preferred driving position (the po sition of the driver's seat, steering wheel and outside rear view mirrors) can be entered into the computer's memory and recalled with the touch of a bu tton. It is also possible to set this function to activate automatica lly when the doors are unlocked. Three different driving positions can be entered into memory. The same buttons are found on the front passenger's side, allowing the position of the front passenger's seat to be memorized.n Entering a position to memoryCheck that the shift lever is set in "P".Turn the "ENGINE START STOP " switch to IGNITION ON mode. Adjust the driver's seat, steering wheel, and outside rear view mirrors to the desired positions. While pushing the "SET" button, push button "1", "2" or "3" until the signal beeps. If the selected button has already been preset, the previ-ously recorded position will be overwritten.STEP 1STEP 2STEP 3 STEP 3
