GSの取扱説明書・マニュアル [全16ページ 0.30MB]
3
8 / 16 ページ
現在のページURL
972-1. Driving procedures2When drivingStarting the engineModes can be switched by pressing the engine switch when carrying the electronic key on your person. (The engine can be started in any mode by operating the switch at the same time as depressing the brake pedal.)n Changing engine switch mode"OFF" mode"ACC" modeSome electrical components such as the audio system can be used. "IG-ON" mode All electrical components can be used. n Starting the engineCheck that the parking brake is set. Check that the shift lever is set in "P".Sit in the driver's seat and firmly depress the brake pedal. The engine switch indicator turns green.Press the engine switch.STEP 1STEP 2STEP 3
参考になったと評価 
3人が参考になったと評価しています。
このマニュアルの目次
-
1 .902-1. Driving procedures...902-1. Driving proceduresDriving the vehicleStarting on a steep inclineFirmly set the parking brake and shift the shift lever to "D". Gently depress the accelerator pedal. Release the parking brake. The following procedures should be observed to ensure saf...
-
2 .912-1. Driving procedures...912-1. Driving procedures2When drivingnBreaking in your new LexusTo extend the life of the vehicle, the following precautions are recommended to observe:lFor the first 180 miles (300 km): Avoid sudden stops.lFor the first 1000 miles (1600 km):* Do not dri...
-
3 .922-1. Driving procedures...922-1. Driving proceduresCAUTIONnWhen starting the vehicleAlways keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping.nWhen driving the vehiclelDo not drive if you are unfamiliar with the location...
-
4 .932-1. Driving procedures...932-1. Driving procedures2When drivingCAUTIONnWhen driving the vehiclelDo not under any circumstances shift the shift lever to "P", "R" or "N" while the vehicle is moving. Doing so can cause significant damage to the transmission and may result in a loss ...
-
5 .942-1. Driving procedures...942-1. Driving proceduresCAUTIONnWhen shifting the shift leverBe careful not to shift the shift lever with the accelerator pedal depressed. This may lead to unexpected rapid acceleration of the vehicle that may cause an accident and result in death or seri...
-
6 .952-1. Driving procedures...952-1. Driving procedures2When drivingCAUTIONnWhen taking a nap in the vehicleAlways turn the engine off. Otherwise, you may accidentally move the shift lever or press the accelerator pedal, which could cause an accident or fire due to abnormal engine ove...
-
7 .962-1. Driving procedures...962-1. Driving proceduresNOTICEnWhile driving the vehicleDo not use the accelerator pedal or depres s accelerator and brake pedals together to hold the vehicle on a hill.nWhen parking the vehicleAlways put the shift lever in "P". Failure to do so may cause...
-
8 .972-1. Driving procedures...972-1. Driving procedures2When drivingStarting the engineModes can be switched by pressing the engine switch when carrying the electronic key on your person. (The engine can be started in any mode by operating the switch at the same time as depressing the ...
-
9 .982-1. Driving procedures...982-1. Driving proceduresnIf the engine does not startThe engine immobilizer system may not have been deactivated. ( → P. 52)nWhen the engine switch indicator flashes in amberThe system may be malfunctioning. Have the vehicle inspected by your Lexus dealer...
-
10 .992-1. Driving procedures...992-1. Driving procedures2When drivingNOTICEnTo prevent battery dischargeDo not leave the engine switch in "ACC" or "IG-ON" mode for long periods if the engine is not running.nWhen starting the engine lDo not race the engine.lIf the engine becomes difficul...
-
11 .1002-1. Driving procedure...1002-1. Driving proceduresTransmissionSelect a shift position appropriate for the driving conditions.n Shifting the shift leverWhile the engine switch is in "IG-ON" mode, depress the brake pedal and move the shift lever.
-
12 .1012-1. Driving procedure...1012-1. Driving procedures2When drivingn Shift position uses*1: To improve fuel consumption and reduce noises, set the shift lever in the "D" position for normal driving.*2:By selecting shift ranges using "S" mode, you can control engine braking forces.n ...
-
13 .1022-1. Driving procedure...1022-1. Driving proceduresChanging shift ranges in "S" modeShift the shift lever to the "S" position and operate the shift lever.UpshiftingDownshiftingThe initial shift range in "S" mode is automatically set to "5" or "4" accord -ing to the vehicle's speed...
-
14 .1032-1. Driving procedure...1032-1. Driving procedures2When drivingnDownshifting restrictions in "S" modeThe shift lever cannot be downshifted if the following speeds are exceeded. (The warning buzzer will sound twice in this situation.)The maximum speeds can get lower when the engi...
-
15 .1042-1. Driving procedure...1042-1. Driving proceduresTurn signal levernTurn signals can be operated whenThe engine switch is in "IG-ON" mode.nIf the indicators flash faster than usualCheck that a light bulb in the front or rear turn signal lights has not burned out.Left turnRight tu...
-
16 .1052-1. Driving procedure...1052-1. Driving procedures2When drivingParking brakeNOTICEnBefore drivingFully release the parking brake. Driving the vehicle with the parking brake set will lead to brake components over-heating, which may affect braking performance and increase brake w...
