81-2. Opening, closing and locking the doors and trunknSwitching the door unlock functionIt is possible to set which doors the entry function unlocks. Turn the engine switch "OFF".When the indicator on the key surface is turned off, push and hold , , or for approximately 5 seconds while pushing the button on the key. The setting changes each time an operation is performed, as shown below. (Wait for at least 5 seconds after each operation to continue an operation.)Unlock the doors using the wireless remote control and open one of the doors.If a door is not opened within 60 seconds after is pressed, the doors will be locked again and the alarm will automatically be set.In case that the alarm is triggered, immediately stop the alarm. ( → P. 54)STEP 1STEP 2Multi-information displayUnlocking doors BeepHold the driver's door handle to unlock only the driver's doorExterior: Beeps 3 timesInterior: Rings onceHold a passenger's door han-dle to unlock all the doorsHold the door handle to unlock the front and rear doors on your sideExterior: Beeps 4 timesInterior: Rings onceHold the door handle to unlock the doorExterior: Beeps onceInterior: Rings onceHold a door handle to unlock all doorsExterior: Beeps twiceInterior: Rings onceSTEP 3
