■Operating the driving position memory after turning the "POWER" switch offMemorized positions (except for the steeri ng wheel position) can be activated up to 180 seconds after the driver's door is opened and another 60 seconds after it is closed again, even after turning the "POWER" switch off.■Canceling the linked door unlock operationTurn the "POWER" switch to ON mode and close the driver's door. While pressing the "SET" button, press the driver's door lock switches (either lock or unlock) until the signal beeps.■Stopping seat position operation part-way throughPerform any of the following operations:●Press the "SET" button.●Press button 1, 2 or 3.●Adjust the seat using the switches (only cancels seat position recall).●Adjust the steering wheel using the tilt and telescopic steering control switch (only cancels steering wheel position recall).■Correct seat positionWhen the seat is in the most forward or most backward position, and the seat is being moved in those directions, the syst em may not correctly recognize the cur-rent position and the memorized posi tion will not be correctly recalled.■CustomizationIf a seat position is memorized, the driv er seat will move back the set distance (→ P. 584 ) from that memorized position. 741-4. Adjustable components (s eats, mirrors, steering wheel)CAUTION■Seat adjustment cautionTake care during seat adjustment so that th e seat does not strike the rear passenger or squeeze your body against the steering wheel.
