MINIの取扱説明書・マニュアル [全269ページ 8.83MB]
ownersmanual2012hardtopclubman.pdf
gizport - 2013-09-05
http://libraryofmotoring.info/.../ownersmanual2012hardtopclubman.pdf - 8.83MB
- キャッシュ
58558view
269page / 8.83MB
MOBILITY Replacing components228Stowing Mobility Kit1.Unscrew filler hose 2 of the sealant bottle from the wheel.2.Unscrew connecting hose of the compressor6 from the sealant bottle.3.Connect the filler hose 2 of the sealant bot-tle to the unoccupied connection on the sealant bottle.This prevents the rest of the sealant from escaping from the bottle.4.Wrap the empty sealant bottle in suitable material to avoid dirt ying the cargo area.5.Stow Mobility Kit back in the vehicle.Distributing the sealantImmediately drive approx. 3.1 miles/5 km so that the sealant evenly distributes itself.Do not exceed speeds of 50 mph/ 80 km/h.If possible, do not drop below 10 mph/ 20 km/h.<Adjusting the tire pressure1.After driving approx. 3.1 miles/5 km or 10 minutes, stop at a suitable location.2.Screw the connection hose 6 of the com-pressor directly onto the tire valve.3.Insert the plug5 into the power socket in the vehicle interior.4.Adjust tire pressure to 1.8 bar/26 psi. With the engine running:>To increase the inflatio n pressure: switch on the compressor. To ch eck the current infla-tion pressure, switch off the compressor.Do not run the comp ressor for longer than 10 minutes; otherwise, the device will overheat and possibly be dam-aged.<>To decrease the inflation pressure: press the release button9.If the tire cannot m aintain the inflation pressure, drive the vehicle again, refer to Distributing the sealan t. Then repeat steps 1to4.If an inflation pressure of 1.8 bar/26 psi still can-not be reached, then the tire is too heavily dam-aged. Contact your ne arest MINI dealer.<Driving onDo not exceed the permitted maximum speed of 50 mph/80 km/h; doing so may result in an accident. <Replace the defective tire as soon as possible and have the new wheel/tire assembly bal-anced.Have the Mobility Kit refilled.Changing wheelsRun-flat tiresTire change for run-flat tires:>Prepare for tire change, page 230>Jack up vehicle, page 230>Tighten lug bolts, page 231Space-saver spare tireTire change with space-saver spare tire:>Remove the space-saver spare tire, page229>Prepare for tire change, page 230>Jack up vehicle, page 230>Mount space-saver spare tire, page 230>Tighten lug bolts, page 231>Drive with space-saver spare tire, page 230MINI: removing the space-saver spare tireThe screw connection of the space-saver spare tire is under the floor mat in the cargo area, on the base of the storage compartment for the tire change set.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
33068 view
11935 view
43011 view
3545 view
28682 view
もっと見る