X3の取扱説明書・マニュアル [全126ページ 4.65MB]
123807.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123807.pdf - 4.65MB
- キャッシュ
21244view
126page / 4.65MB
Replacing components96Halogen low beams H7 bulb, 55 watts Always wear gloves and eye protection - the atmosphere within the bulb is pres-surized. Failure to observe this precaution can lead to personal injury should the bulb be dam-aged.< Driver's side1.Position the screwdriver from the onboard tool kit and pull off the lamp cover.Exercise caution when handling the screwdriver, as otherwise personal injury can occur or the vehicle can be dam-aged.< 2.Press the bulb holder downward and remove.3.Remove the bulb, install a new bulb.4.Place the bulb holder with the lower edge against the bracket and press it in until the lamp base locks in place.Front passenger sideBefore replacing the bulb, remove the reservoir for the windshield washing system from the bracket. To do so, loosen the bolt, refer to arrow, and place the reservoir to one side. Bear in mind that the windshield washing system reservoir is heavy. If you do not, injuries or damage to the vehicle can occur. < For bulb replacement procedure, refer to Driver's side.Halogen high beams H7 bulb, 55 watts Always wear gloves and eye protection - the atmosphere within the bulb is pres-surized. Failure to observe this precaution can lead to personal injury should the bulb be dam-aged.< Driver's side1.Open the clip and remove the lamp cover.2.Press the bulb holder downward and remove, refer to Low beams.3.Pull off the lamp base; plug in a new lamp base.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
54162 view
26389 view
21096 view
23290 view
22420 view
もっと見る