Z4の取扱説明書・マニュアル [全132ページ 3.14MB]
123837.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123837.pdf - 3.14MB
- キャッシュ
21361view
132page / 3.14MB
Technology for driving comfort and safety543.In the event of complete tire pressure loss, 0 psi/0 kilopascal, you can estimate the possible distance for continued driving on the basis of the following guidelines:>With a light load:1 person without luggage:approx. 155 miles/250 km>With a medium load:1 person, cargo bay full,or2 persons without luggage:approx. 90 miles/150 km>With a full load:2 persons, cargo bay full:approx. 30 miles/50 kmDrive cautiously. Do not exceed a speed of 50 mph/80 km/h. Driving characteris-tics change if there is a loss of tire pressure. This includes reduced tracking stability in brak-ing, extended braking distance and altered nat-ural steering characteristics.If unusual vibration or loud noises occur during the journey, this may be an indication that the damaged tire has finally failed. Reduce your speed and pull over to the side of the road at the earliest opportunity. Otherwise, parts of the tire could come loose and cause an accident. Do not continue driving. Contact a BMW center. <Tire Pressure Monitor TPM*The conceptTPM monitors the tire inflation pressure in all four mounted tires. The system reports if infla-tion pressure has dropped significantly in one or more of the tires.System requirementsTo ensure a reliable flat tire warning, the system must have been reset while tire inflation pres-sures were correct.Always use tires with TPM electronics to ensure that the system operates properly.The system must be reset each time a tire inflation pressure has been corrected or a wheel or tire has been changed. <System limitationsTPM cannot report sudden serious tire damage due to external causes. <The system will not operate correctly if it was not reset, e.g. it may report a flat tire even if the tire inflation pressures are correct.The system is inactive and cannot indicate a flat tire if a wheel without TPM electronics is mounted or if other systems or devices that use the same radio frequency temporarily interfere with the TPM system.Resetting the systemThe system must be reset each time a tire inflation pressure has been corrected or a wheel or tire has been changed. <1.Start the engine but do not drive off yet.2.Press the button until the yellow warning lamp in the instrument cluster lights up for a few seconds.3.Drive off.After several minutes of driving, the current inflation pressures in the tires are adopted as the target values to be monitored. The resetting procedure is completed automat-ically without further notice during the trip, which can be interrupted at any time. Resetting is continued automatically when you continue driving.
参考になったと評価
6人が参考になったと評価しています。
その他の取扱説明書
38351 view
31138 view
13905 view
21365 view
21069 view
もっと見る