MENTOR MENUETの取扱説明書・マニュアル [全34ページ 2.24MB]
83120.pdf
gizport - 2013-09-25
http://153.127.246.254/.../83120.pdf - 2.24MB
- キャッシュ
13493view
34page / 2.24MB
81.0 INTRODUCTIONcongratulations with your new DALI MENtOR loudspeaker. It is important to us that your new DALI loudspeakers are set up and connected optimally. For this reason, we recommend that you read this manual and follow its instructions. this manual contains instructions for setup and connection, as well as tips and advice on how to get the most out of your new loudspeakers. DALI is acclaimed around the world for unique loudspeakers built to our uncompromising standards for design and performance. the goal for every single DALI loudspeaker is always our foremost commitment: to create a listening experience in your home that will make you forget time and place.Remember to sign up for the DALI newsletter at www.dali-speakers.com.Enjoy2.0 UNPACKINGBe careful not to damage the contents when you unpack the parts. Depending on which DALI MENtOR model you have bought, different accessories come with the loudspeaker. check that all parts are contained in the cardboard box (see table 1). Keep the packaging materials should your speaker need to be relocated or serviced.3.0 POSITIONINGto achieve the best results, the loudspeaker setup should be symmetrical round your favorite listening position (except for MENtOR SuB), (see Figure 1A – 1c). We recommend that you experiment with the position of your loudspeakers – the sound quality will change depending on the loudspeaker position. For MENOR MENuEt , 1, 2, LcR, VOKAL, the speakers should ideally be positioned, so that the height of the tweeter is approximately at ear height when seated in your favorite listening position. MENtOR 5, 6 and 8 and SuB are designed as loor standing speakers. they should be positioned minimum 10 – 20 cm (4 – 8”) from the rear wall. Ideally MENtOR MENuEt, 1, 2, LcR, VOKAL, are designed to be positioned lat up against the wall. MENtOR 2 is designed for both stand mounting and on-wall positioning lat up against the wall. Objects positioned between the speaker and listening position might negatively affect sound quality. the speakers are designed to meet our wide dispersion principle, so they should not be angled towards the listening position, but be positioned parallel with the rear wall (see Figure 2). By parallel positioning, the distortion in the main listening area will be lowered and the room integration will be better. the wide dispersion principle will also ensure that sound is spread evenly within a large area in the listening room.
参考になったと評価
5人が参考になったと評価しています。